[Elecraft] K3_EZ by Bill Coleman, N2BC, SK

Mon Oct 1 20:57:59 EDT 2018

Mr. Coleman is indeed a SK. I exchanged several emails with Bill with 
regard to K3_EZ. He told me he had severe health issues the past several 
years and was unable to continue his involvement developing K3_EZ.
Bill also told me the source code was lost.
I just checked his QRZ.com page ad it still up and noted with Bill SK in 
August of 2017..
73,
Jim AC0E

On October 1, 2018 15:03:40 elecraft-request at mailman.qth.net wrote:

> Send Elecraft mailing list submissions to
> 	elecraft at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
> 	elecraft-request at mailman.qth.net
>
> You can reach the person managing the list at
> 	elecraft-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
>
>
> Today's Topics:
>
>   1. K3 Stuck in MCU Load (Mike Cizek W0VTT)
>   2. Re: OT - backup software (Dick Green WC1M)
>   3. Re: RRC/K3 RTTY issue (Nr4c)
>   4. Re: K3 Stuck in MCU Load (RIchard Williams)
>   5. Re: K3 Stuck in MCU Load - SOLVED (Mike Cizek W0VTT)
>   6. Elecraft CW Net Announcement (kevinr)
>   7. At Pacificon: 25th anniversary talk about the NorCal 40
>      transceiver & NorCal QRP Club (Giancarlo Moda)
>   8. K3_EZ Installation (Dick Dickinson)
>   9. Re: K3_EZ Installation (Don Wilhelm)
>  10. Re: K3_EZ Installation (Harlan Sherriff)
>  11. K3_EZ Installation (Dick Dickinson)
>  12. Elecraft CW Net Report (kevinr)
>  13. Eagles Peaceful Easy Feeling live (John Dolan)
>  14. Re: K3_EZ Installation (Rick WA6NHC)
>  15. Re: K3_EZ Installation (Jim McDonald)
>  16. Re: K3_EZ Installation (Jim McDonald)
>  17. Re: Eagles Peaceful Easy Feeling live (Ken G Kopp)
>  18. Re: K3 Stuck in MCU Load - SOLVED (John_N1JM)
>  19. Re: K3 Stuck in MCU Load - SOLVED (John_N1JM)
>  20. KAT500 For Sale (Bob Witmer)
>  21. CODEC (Mike Greenway)
>  22. Re: Eagles Peaceful Easy Feeling live (David Olean)
>  23. Re: CODEC (ROBERT MUELLER)
>  24. Re: CODEC (Bob McGraw K4TAX)
>  25. Re: CODEC (Rick Bates (WA6NHC))
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 29 Sep 2018 16:44:46 -0500
> From: "Mike Cizek W0VTT" <mgcizek at gmail.com>
> To: <elecraft at mailman.qth.net>
> Subject: [Elecraft] K3 Stuck in MCU Load
> Message-ID: <89B2E43C942241F8AED28A2534CB6BFF at X230>
> Content-Type: text/plain;	charset="iso-8859-1"
>
> Greetings -
>
> I appear to have really #@(*)(*%&ed up my K3.  While updating the firmware,
> I accidentally hit either a key on the computer keyboard or one of the mouse
> buttons.  The K3 Utility window "grayed out" and the K3 is stuck in MCU
> Load, no backlight, TX LED flashing.
>
> Setup: Astron 50A PSU; K3 # 2768 with new KIO3B board; direct USB connection
> to Lenovo Thinkpad running WIN7 Home Premium; K3 Util v 1.16.7.25.  Computer
> and K3 Utility both recognize the COM port; latest FTDI drivers installed.
>
> Yes, I know there is supposed to be a cure for this, but it didn't work.  I
> tried:
>
> 1. Restarting both the computer and the K3 a few times.
> 2. Remove & reconnect power supply from K3, hold POWER button to force it
> into bootloader mode. (which it is already in)
> 3. Factory reset (power on while holding SHIFT/LO button). Never got the EE
> INIT message.
> 4. Uninstall and re-install K3 Utility and try 1-3 again.
> 5. Uninstall and re-install front panel assembly; try 1-3 again.
>
> K3 Utility is still trying to connect and the TX LED is still flashing.  Any
> ideas before I call tech support on Monday?  Thanks.
>
> --
> 73,
> Mike Cizek W?VTT
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 29 Sep 2018 17:50:33 -0400
> From: "Dick Green WC1M" <wc1m73 at gmail.com>
> To: "'John Saxon'" <johnbsaxon at yahoo.com>,	"'Elecraft Reflector'"
> 	<elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] OT - backup software
> Message-ID: <[email protected]>
> Content-Type: text/plain;	charset="utf-8"
>
> I use EaseUS. It's a complete package with options for scheduled full 
> backup, incremental backups, continuous backup, disk image, etc. Also can 
> be used to clone disks.
>
> Acronis is a very popular backup package for Windows. I used to use it but 
> had several mishaps, including not being able to read old backups. Haven't 
> tried it in a long time.
>
> I have EaseUS setup to do a full backup on each disk in my system on the 
> first day of the month, and incremental backups on each disk once a day. 
> The backups are written to a hard drive in a USB dock. I have a set of five 
> of these disks and rotate to the next drive after the last incremental 
> backup of the month. Whenever I visit my safe deposit box, I put one of the 
> disks in the box and retrieve the one that I put in the box last time. That 
> way, I have an offsite backup in case of disaster. It might be a little 
> old, but better than nothing.
>
> Further, I have Windows 10 on and SSD and all of my critical data on a 
> separate SSD, including work files, spreadsheets, Quicken data, all my ham 
> radio data (e.g., contest logs), and so forth. This data is continuously 
> copied to the cloud and synced with all my devices so that I have multiple 
> copies of it, including the versions in the hard drive backup rotation. 
> There are many cloud services that can be used for this, but I use 
> Microsoft OneDrive because I get 1 TB of storage free with my subscription 
> to Office 365. It helps to have very high speed internet with fast upload 
> speed (75/15 here, but usually it's more like 90/20.)
>
> When apps allow it, I configure them to keep user-specific data on my user 
> data drive. I also try to get them to save their configuration data to my 
> data drive. Unfortunately, some apps don't let you change their data and/or 
> configuration locations. These days it's often in C:\Users\<your user 
> ID>\AppData. I have to be content with that data being backed up to local 
> hard drives only.
>
> I've also configured Windows to do a scheduled System Restore Point each 
> day, but it doesn't always work. Typically it's done when updates are 
> applied and sometimes when apps are installed. When I remember, I do one 
> manually. These restore points can be crucial if your system gets messed up 
> by a hardware failure or problem with a Windows update.
>
> As you can tell, I'm a proponent of belt-and-suspenders backups. I've been 
> burned many times, going back as far as 1972. First casualty was a term 
> paper, back when most college students used typewriters and virtually no 
> one would have tried to type a paper into a computer. The professor didn't 
> believe me when I told him that a poor design in the syntax of the user 
> interface caused me to accidentally erase the paper. He looked at me like 
> I'd told him my dog ate my homework.
>
> 73, Dick WC1M
>
> -----Original Message-----
> From: John Saxon <johnbsaxon at yahoo.com>
> Sent: Friday, September 28, 2018 9:05 PM
> To: Elecraft Reflector <elecraft at mailman.qth.net>
> Subject: [Elecraft] OT - backup software
>
> I am not happy with my current backup software package.  Any 
> recommendations on backup software?  Like it to be free, but not necessary.
> 73,JohnK5ENQ
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Sat, 29 Sep 2018 20:16:43 -0400
> From: Nr4c <nr4c at widomaker.com>
> To: John Baumgarten <johnbaumgarten1 at gmail.com>
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] RRC/K3 RTTY issue
> Message-ID: <54955009-17E0-4738-9A60-E1885645348E at widomaker.com>
> Content-Type: text/plain;	charset=utf-8
>
> Check DATA sub-mode.  Do you want FSK-D or AFSK?
>
> Sounds like you have set FSK-D and need AFSK.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On Sep 29, 2018, at 4:37 PM, John Baumgarten <johnbaumgarten1 at gmail.com> wrote:
>>
>> After not trying RTTY for a while, can?t get it working with my two K3 RRC 
>> set up on RTTY. No problem decoding and prints out fine using N1MM/MMTTY. 
>> Just can?t tx!  Get a low solid tone. The correct macro is printing on 
>> screen?no diddling!  Must be something simple I set up wrong?  Mini USB to 
>> computer is connected!  Any ideas, please. Thanks
>> John, N0IJ
>>
>> Sent from my I phone
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to nr4c at widomaker.com
>
>
>
> ------------------------------
>
> Message: 4
> Date: Sun, 30 Sep 2018 00:20:59 +0000 (UTC)
> From: RIchard Williams <richarddw1945 at yahoo.com>
> To: "mgcizek at gmail.com" <mgcizek at gmail.com>,
> 	"elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K3 Stuck in MCU Load
> Message-ID: <2045208908.1542728.1538266859473 at mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
> IF you are using the USB connection to the computer, you need to either 
> switch to the RS 232 port and use that;? OR take the cover off the K3 and 
> move the little slide switch on the KIO3B board to the opposite position.? 
> You can then use the USB method.? ?After you have re-installed the 
> firmware, move the switch back to the other position.
> IF your KIO3B board does not have the small switch,? it is an older board 
> and you have to use a RS232 cable.? Check with Elecraft, and they will 
> probably switch boards to the newer one with the switch.
> I had the same issue awhile back.
> Dick, K8ZTT
> Sent from Yahoo Mail on Android
>
>  On Sat, Sep 29, 2018 at 11:45, Mike Cizek W0VTT<mgcizek at gmail.com> wrote:   
>  Greetings -
>
> I appear to have really #@(*)(*%&ed up my K3.? While updating the firmware,
> I accidentally hit either a key on the computer keyboard or one of the mouse
> buttons.? The K3 Utility window "grayed out" and the K3 is stuck in MCU
> Load, no backlight, TX LED flashing.
>
> Setup: Astron 50A PSU; K3 # 2768 with new KIO3B board; direct USB connection
> to Lenovo Thinkpad running WIN7 Home Premium; K3 Util v 1.16.7.25.? Computer
> and K3 Utility both recognize the COM port; latest FTDI drivers installed.
>
> Yes, I know there is supposed to be a cure for this, but it didn't work.? I
> tried:
>
> 1. Restarting both the computer and the K3 a few times.
> 2. Remove & reconnect power supply from K3, hold POWER button to force it
> into bootloader mode. (which it is already in)
> 3. Factory reset (power on while holding SHIFT/LO button). Never got the EE
> INIT message.
> 4. Uninstall and re-install K3 Utility and try 1-3 again.
> 5. Uninstall and re-install front panel assembly; try 1-3 again.
>
> K3 Utility is still trying to connect and the TX LED is still flashing.? Any
> ideas before I call tech support on Monday?? Thanks.
>
> --
> 73,
> Mike Cizek W?VTT
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to richarddw1945 at yahoo.com
>
>
> ------------------------------
>
> Message: 5
> Date: Sat, 29 Sep 2018 20:03:32 -0500
> From: "Mike Cizek W0VTT" <mgcizek at gmail.com>
> To: <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K3 Stuck in MCU Load - SOLVED
> Message-ID: <9C5A7D3C0DC84B3DBA404EAD4D5194ED at X230>
> Content-Type: text/plain;	charset="iso-8859-1"
>
> Many thanks for all the replies.  K8ZTT had the correct answer and I am now
> up and running again.
>
> --
> 73,
> Mike Cizek W?VTT
> ________________________________________
> From: RIchard Williams [mailto:richarddw1945 at yahoo.com]
> Sent: Saturday, September 29, 2018 19:21
> To: mgcizek at gmail.com; elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 Stuck in MCU Load
>
> IF you are using the USB connection to the computer, you need to either
> switch to the RS 232 port and use that;? OR take the cover off the K3 and
> move the little slide switch on the KIO3B board to the opposite position.?
> You can then use the USB method.? ?After you have re-installed the firmware,
> move the switch back to the other position.
>
> IF your KIO3B board does not have the small switch,? it is an older board
> and you have to use a RS232 cable.? Check with Elecraft, and they will
> probably switch boards to the newer one with the switch.
>
> I had the same issue awhile back.
>
> Dick, K8ZTT
>
> Sent from Yahoo Mail on Android
>
> On Sat, Sep 29, 2018 at 11:45, Mike Cizek W0VTT
> <mgcizek at gmail.com> wrote:
> Greetings -
>
> I appear to have really #@(*)(*%&ed up my K3.? While updating the firmware,
> I accidentally hit either a key on the computer keyboard or one of the mouse
> buttons.? The K3 Utility window "grayed out" and the K3 is stuck in MCU
> Load, no backlight, TX LED flashing.
>
> Setup: Astron 50A PSU; K3 # 2768 with new KIO3B board; direct USB connection
> to Lenovo Thinkpad running WIN7 Home Premium; K3 Util v 1.16.7.25.? Computer
> and K3 Utility both recognize the COM port; latest FTDI drivers installed.
>
> Yes, I know there is supposed to be a cure for this, but it didn't work.? I
> tried:
>
> 1. Restarting both the computer and the K3 a few times.
> 2. Remove & reconnect power supply from K3, hold POWER button to force it
> into bootloader mode. (which it is already in)
> 3. Factory reset (power on while holding SHIFT/LO button). Never got the EE
> INIT message.
> 4. Uninstall and re-install K3 Utility and try 1-3 again.
> 5. Uninstall and re-install front panel assembly; try 1-3 again.
>
> K3 Utility is still trying to connect and the TX LED is still flashing.? Any
> ideas before I call tech support on Monday?? Thanks.
>
> --
> 73,
> Mike Cizek W?VTT
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to richarddw1945 at yahoo.com
>
>
>
> ------------------------------
>
> Message: 6
> Date: Sat, 29 Sep 2018 22:08:17 -0700
> From: kevinr <kevinr at coho.net>
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] Elecraft CW Net Announcement
> Message-ID: <180728e7-41c4-7ae8-35b3-8b2cc17321cd at coho.net>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Good Evening,
>
> ?? The sun remains quiet.? The lower noise floor helps copy of weaker
> signals.? There is still a solar breeze feeding ions through the cracks
> in our magnetic field.? Whatever it takes.
>
> ?? Some of the trees are turning color lower down the mountain. Up here
> only the shrubs change color, the alder leaves turn brown and fall off.?
> I guess that's a color change.? But the vine maple turn a bright red
> which contrasts nicely with the green of the fir forests.
>
> ? The elk are still shredding trees shining up their antlers while the
> elk hunters drive all over trying to find them.? The clear cut half a
> mile away is forcing the game to move off.? The bountiful bear berries
> are raising a fine crop of grouse.? They keep my heart well exercised
> every time I kick one of more into flight.? I know where they live you'd
> think I'd get used to them flushing.
>
> ?? 7047 kHz worked well last week so I'll try it again.
>
> Please join us tomorrow on:
>
> 14050 kHz at 2200z Sunday (3 PM PDT Sunday)
> ? 7047 kHz at 0000z Monday (5 PM PDT Sunday)
>
> 73,
> Kevin. KD5ONS
>
> _
>
>
>
> ------------------------------
>
> Message: 7
> Date: Sun, 30 Sep 2018 10:48:22 +0000 (UTC)
> From: Giancarlo Moda <i7swx at yahoo.com>
> To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
> Subject: [Elecraft] At Pacificon: 25th anniversary talk about the
> 	NorCal 40 transceiver & NorCal QRP Club
> Message-ID: <1499970558.1567534.1538304502724 at mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
> Hi Wayne,
> congratulations for the talk about the NorCal 40 RTX quarter of a century 
> story. After Pacificon the presentation will be made available on a web 
> site and/or downloadable? There is always something to learn.
> Thanks and 73
> GianI7SWX
>
>
> |  | Mail priva di virus. www.avast.com  |
>
>
>
> ------------------------------
>
> Message: 8
> Date: Sun, 30 Sep 2018 16:37:47 -0400
> From: "Dick Dickinson" <softblue at windstream.net>
> To: <elecraft at mailman.qth.net>
> Subject: [Elecraft] K3_EZ Installation
> Message-ID: <[email protected]>
> Content-Type: text/plain;	charset="us-ascii"
>
> I'm on a recent Windows 10 fresh build.  I'm not quite comprehending the
> installation process for K3_EZ V8.
>
>
>
> I have a zipped file which contains an a setup.exe, K3_EZ.application and a
> folder of Application Files.  Further inside the Application Files folder is
> another, K3_EZ_2_0_0_7 folder which contains K3_EZ.application, a Resources
> folder and several .deploy file and one .manifest file.
>
>
>
> It is not clear to me where to unzip the original K3_EZ_V2008.zip folder to
> and precisely what to do with the contents.
>
>
>
> What I've done so far seems to yield failure.  I do have .NET 2.0 and .NET
> 3.0 (combined as .NET 3.5, I believe) installed.
>
>
>
> Specific instructions will be appreciated.
>
>
>
>
>
> 73,
>
> Dick - KA5KKT
>
>
>
>
>
>
>
> ------------------------------
>
> Message: 9
> Date: Sun, 30 Sep 2018 17:04:39 -0400
> From: Don Wilhelm <donwilh at embarqmail.com>
> To: Dick Dickinson <softblue at windstream.net>, elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3_EZ Installation
> Message-ID: <db6ae8e3-157c-098a-dc9a-06d8bacf3566 at embarqmail.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Dick,
>
> I would recommend you unzip it to a new folder and then run the setup.exe.
>
> 73,
> Don W3FPR
>
> On 9/30/2018 4:37 PM, Dick Dickinson wrote:
>> I'm on a recent Windows 10 fresh build.  I'm not quite comprehending the
>> installation process for K3_EZ V8.
>>
>> I have a zipped file which contains an a setup.exe, K3_EZ.application and a
>> folder of Application Files.  Further inside the Application Files folder is
>> another, K3_EZ_2_0_0_7 folder which contains K3_EZ.application, a Resources
>> folder and several .deploy file and one .manifest file.
>>
>> It is not clear to me where to unzip the original K3_EZ_V2008.zip folder to
>> and precisely what to do with the contents.
>>
>> What I've done so far seems to yield failure.  I do have .NET 2.0 and .NET
>> 3.0 (combined as .NET 3.5, I believe) installed.
>
>
> ------------------------------
>
> Message: 10
> Date: Sun, 30 Sep 2018 19:07:38 -0400
> From: Harlan Sherriff <hsherriff at reagan.com>
> To: donwilh at embarqmail.com
> Cc: elecraft at mailman.qth.net, Dick Dickinson <softblue at windstream.net>
> Subject: Re: [Elecraft] K3_EZ Installation
> Message-ID: <EE9FA245-C6BA-4E1B-B114-1BE12547A241 at reagan.com>
> Content-Type: text/plain;	charset=us-ascii
>
> You may have to right-click the .exe file and run as administrator
>
> Sent from my iPhone
>
>> On Sep 30, 2018, at 5:04 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:
>>
>> Dick,
>>
>> I would recommend you unzip it to a new folder and then run the setup.exe.
>>
>> 73,
>> Don W3FPR
>>
>>> On 9/30/2018 4:37 PM, Dick Dickinson wrote:
>>> I'm on a recent Windows 10 fresh build.  I'm not quite comprehending the
>>> installation process for K3_EZ V8.
>>> I have a zipped file which contains an a setup.exe, K3_EZ.application and a
>>> folder of Application Files.  Further inside the Application Files folder is
>>> another, K3_EZ_2_0_0_7 folder which contains K3_EZ.application, a Resources
>>> folder and several .deploy file and one .manifest file.
>>> It is not clear to me where to unzip the original K3_EZ_V2008.zip folder to
>>> and precisely what to do with the contents.
>>> What I've done so far seems to yield failure.  I do have .NET 2.0 and .NET
>>> 3.0 (combined as .NET 3.5, I believe) installed.
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to hsherriff at reagan.com
>
>
>
> ------------------------------
>
> Message: 11
> Date: Sun, 30 Sep 2018 19:38:31 -0400
> From: "Dick Dickinson" <softblue at windstream.net>
> To: <elecraft at mailman.qth.net>
> Subject: [Elecraft] K3_EZ Installation
> Message-ID: <[email protected]>
> Content-Type: text/plain;	charset="us-ascii"
>
> Thanks, Don and Harlan,
>
>
>
> It seems that running the setup routine as Administrator did the trick.
>
>
>
> 73,
>
> Dick - KA5KKT
>
>
>
> You may have to right-click the .exe file and run as administrator
>
>
>
> Sent from my iPhone
>
>
>
>> On Sep 30, 2018, at 5:04 PM, Don Wilhelm <donwilh at embarqmail.com>
> wrote:
>
>>
>
>> Dick,
>
>>
>
>> I would recommend you unzip it to a new folder and then run the setup.exe.
>
>>
>
>> 73,
>
>> Don W3FPR
>
>>
>
>>> On 9/30/2018 4:37 PM, Dick Dickinson wrote:
>
>>> I'm on a recent Windows 10 fresh build.  I'm not quite comprehending the
>
>>> installation process for K3_EZ V8.
>
>>> I have a zipped file which contains an a setup.exe, K3_EZ.application and
> a
>
>>> folder of Application Files.  Further inside the Application Files folder
> is
>
>>> another, K3_EZ_2_0_0_7 folder which contains K3_EZ.application, a
> Resources
>
>>> folder and several .deploy file and one .manifest file.
>
>>> It is not clear to me where to unzip the original K3_EZ_V2008.zip folder
> to
>
>>> and precisely what to do with the contents.
>
>>> What I've done so far seems to yield failure.  I do have .NET 2.0 and
> .NET
>
>>> 3.0 (combined as .NET 3.5, I believe) installed.
>
>> ______________________________________________________________
>
>
>
> ------------------------------
>
> Message: 12
> Date: Sun, 30 Sep 2018 17:11:23 -0700
> From: kevinr <kevinr at coho.net>
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] Elecraft CW Net Report
> Message-ID: <035b93f5-9ab7-5dfe-9b12-25c70360191c at coho.net>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Good Evening,
>
> ??? I searched up and down on the forty meter band to find an
> unoccupied frequency.? From 7030 to 7070 kHz there was a swath of RTTY
> folks tweedeling away.? Oh well, the band sounded good though which
> bodes well for the future.
>
>
> ? On 14050.5 kHz at 2200z:
>
> W0CZ - Ken - ND
>
> AB9V - Mike - IN
>
> K6XK - Roy - IA
>
> K4JPN - Steve - GA
>
>
> ? Twenty meters was very quiet today with mild and slow QSB. Everyone I
> could hear was good copy even if the signals dropped below S0.? Forty
> meters also sounded good filled with RTTY signals of various strength
> levels.? There was a little storm noise there too.
>
> ?? Tomorrow the falling trees will awaken me a little after dawn.? This
> logging company falls trees the old fashioned way: with saws so they use
> natural light.? Larger companies have a variety of large falling
> equipment which have lots of lights attached.? They start work two to
> three hours before dawn to take advantage of the moisture.? I'm glad
> these guys let me sleep late :)
>
> ?? Until next week 73,
>
> ????? Kevin.
>
>
> KD5ONS
>
> -
>
>
>
> ------------------------------
>
> Message: 13
> Date: Sun, 30 Sep 2018 20:52:35 -0400
> From: John Dolan <john.dolan55 at gmail.com>
> To: Elecraft at mailman.qth.net
> Subject: [Elecraft] Eagles Peaceful Easy Feeling live
> Message-ID: <60FC5311-8465-4833-B7C4-5110457015D1 at gmail.com>
> Content-Type: text/plain;	charset=us-ascii
>
> Notice how Bernie pulls his left shoulder and you can see how the B string 
> Bender works.
>
> https://www.youtube.com/watch?v=byZn1KBzdeI&list=RDR4qHhFuxFpw&index=6
>
> ------------------------------
>
> Message: 14
> Date: Sun, 30 Sep 2018 18:15:56 -0700
> From: Rick WA6NHC <wa6nhc at gmail.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3_EZ Installation
> Message-ID: <8b068f91-00f0-fc19-a592-84359535a062 at gmail.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I will submit that if this is required by ANY software, that it isn't
> packaged correctly.? An elevated installer should be used and installing
> as admin is generally a really bad idea.? There are a few exceptions
> only.? Install normally, K3_EZ will install correctly.
>
>
> Rick nhc
>
>
> On 9/30/2018 4:07 PM, Harlan Sherriff via Elecraft wrote:
>> You may have to right-click the .exe file and run as administrator
>>
>> Sent from my iPhone
>>
>>> On Sep 30, 2018, at 5:04 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:
>>>
>>> Dick,
>>>
>>> I would recommend you unzip it to a new folder and then run the setup.exe.
>>>
>>> 73,
>>> Don W3FPR
>>>
>>>> On 9/30/2018 4:37 PM, Dick Dickinson wrote:
>>>> I'm on a recent Windows 10 fresh build.  I'm not quite comprehending the
>>>> installation process for K3_EZ V8.
>>>> I have a zipped file which contains an a setup.exe, K3_EZ.application and a
>>>> folder of Application Files.  Further inside the Application Files folder is
>>>> another, K3_EZ_2_0_0_7 folder which contains K3_EZ.application, a Resources
>>>> folder and several .deploy file and one .manifest file.
>>>> It is not clear to me where to unzip the original K3_EZ_V2008.zip folder to
>>>> and precisely what to do with the contents.
>>>> What I've done so far seems to yield failure.  I do have .NET 2.0 and .NET
>>>> 3.0 (combined as .NET 3.5, I believe) installed.
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to hsherriff at reagan.com
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to wa6nhc at gmail.com
>
>
>
> ------------------------------
>
> Message: 15
> Date: Sun, 30 Sep 2018 20:24:28 -0500
> From: "Jim McDonald" <jim at n7us.net>
> To: "'Rick WA6NHC'" <wa6nhc at gmail.com>,	<elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K3_EZ Installation
> Message-ID: <[email protected]>
> Content-Type: text/plain;	charset="utf-8"
>
> I noticed some bugs with that version of K3_EZ.  I think they were in 
> saving TQ EQ settings, but I don't remember for sure.  The 2005 or 2007 
> versions didn't have those bugs.
>
> I believe the developer is a SK.
>
> Jim N7US
>
> -----Original Message-----
>
>
> I will submit that if this is required by ANY software, that it isn't 
> packaged correctly.  An elevated installer should be used and installing as 
> admin is generally a really bad idea.  There are a few exceptions only.  
> Install normally, K3_EZ will install correctly.
>
>
> Rick nhc
>
>
> On 9/30/2018 4:07 PM, Harlan Sherriff via Elecraft wrote:
>> You may have to right-click the .exe file and run as administrator
>>
>> Sent from my iPhone
>>
>>> On Sep 30, 2018, at 5:04 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:
>>>
>>> Dick,
>>>
>>> I would recommend you unzip it to a new folder and then run the setup.exe.
>>>
>>> 73,
>>> Don W3FPR
>>>
>>>> On 9/30/2018 4:37 PM, Dick Dickinson wrote:
>>>> I'm on a recent Windows 10 fresh build.  I'm not quite comprehending
>>>> the installation process for K3_EZ V8.
>>>> I have a zipped file which contains an a setup.exe,
>>>> K3_EZ.application and a folder of Application Files.  Further inside
>>>> the Application Files folder is another, K3_EZ_2_0_0_7 folder which
>>>> contains K3_EZ.application, a Resources folder and several .deploy file and 
>>>> one .manifest file.
>>>> It is not clear to me where to unzip the original K3_EZ_V2008.zip
>>>> folder to and precisely what to do with the contents.
>>>> What I've done so far seems to yield failure.  I do have .NET 2.0
>>>> and .NET
>>>> 3.0 (combined as .NET 3.5, I believe) installed.
>
>
>
> ------------------------------
>
> Message: 16
> Date: Sun, 30 Sep 2018 20:26:33 -0500
> From: "Jim McDonald" <jim at n7us.net>
> To: <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K3_EZ Installation
> Message-ID: <[email protected]>
> Content-Type: text/plain;	charset="us-ascii"
>
> Sorry, I meant TX EQ.
>
> Jim N7US
>
> -----Original Message-----
>
> I noticed some bugs with that version of K3_EZ.  I think they were in saving
> TQ EQ settings, but I don't remember for sure.  The 2005 or 2007 versions
> didn't have those bugs.
>
> I believe the developer is a SK.
>
> Jim N7US
>
>
>
>
> ------------------------------
>
> Message: 17
> Date: Sun, 30 Sep 2018 19:31:13 -0600
> From: Ken G Kopp <kengkopp at gmail.com>
> To: John Dolan <john.dolan55 at gmail.com>, Elecraft
> 	<elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] Eagles Peaceful Easy Feeling live
> Message-ID:
> 	<CAD4CdTMpqq1nw=mE-4n9Qa=pDq4hip7vrV1W9=CmtS639P5X1A at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> John, did you intend to send this to the reflector?
>
> 73 !
>
> K0PP
>
> On Sun, Sep 30, 2018, 18:53 John Dolan <john.dolan55 at gmail.com> wrote:
>
>> Notice how Bernie pulls his left shoulder and you can see how the B string
>> Bender works.
>>
>> https://www.youtube.com/watch?v=byZn1KBzdeI&list=RDR4qHhFuxFpw&index=6
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to kengkopp at gmail.com
>>
>
>
> ------------------------------
>
> Message: 18
> Date: Sun, 30 Sep 2018 19:38:40 -0700 (MST)
> From: John_N1JM <johnn1jm at gmail.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 Stuck in MCU Load - SOLVED
> Message-ID: <1538361520375-0.post at n2.nabble.com>
> Content-Type: text/plain; charset=UTF-8
>
> What was the answer? Didn't show up on the reflector.
>
> John N1JM
>
>
> Mike Cizek W0VTT wrote
>> Many thanks for all the replies.  K8ZTT had the correct answer and I am
>> now
>> up and running again.
>>
>> --
>> 73,
>> Mike Cizek W?VTT
>> ________________________________________
>> From: RIchard Williams [mailto:
>
>> richarddw1945@
>
>> ]
>> Sent: Saturday, September 29, 2018 19:21
>> To:
>
>> mgcizek@
>
>> ;
>
>> elecraft at .qth
>
>> Subject: Re: [Elecraft] K3 Stuck in MCU Load
>>
>> IF you are using the USB connection to the computer, you need to either
>> switch to the RS 232 port and use that;? OR take the cover off the K3 and
>> move the little slide switch on the KIO3B board to the opposite position.?
>> You can then use the USB method.? ?After you have re-installed the
>> firmware,
>> move the switch back to the other position.
>>
>> IF your KIO3B board does not have the small switch,? it is an older board
>> and you have to use a RS232 cable.? Check with Elecraft, and they will
>> probably switch boards to the newer one with the switch.
>>
>> I had the same issue awhile back.
>>
>> Dick, K8ZTT
>>
>> Sent from Yahoo Mail on Android
>>
>> On Sat, Sep 29, 2018 at 11:45, Mike Cizek W0VTT
>> &lt;
>
>> mgcizek@
>
>> &gt; wrote:
>> Greetings -
>>
>> I appear to have really #@(*)(*%&ed up my K3.? While updating the
>> firmware,
>> I accidentally hit either a key on the computer keyboard or one of the
>> mouse
>> buttons.? The K3 Utility window "grayed out" and the K3 is stuck in MCU
>> Load, no backlight, TX LED flashing.
>>
>> Setup: Astron 50A PSU; K3 # 2768 with new KIO3B board; direct USB
>> connection
>> to Lenovo Thinkpad running WIN7 Home Premium; K3 Util v 1.16.7.25.?
>> Computer
>> and K3 Utility both recognize the COM port; latest FTDI drivers installed.
>>
>> Yes, I know there is supposed to be a cure for this, but it didn't work.?
>> I
>> tried:
>>
>> 1. Restarting both the computer and the K3 a few times.
>> 2. Remove & reconnect power supply from K3, hold POWER button to force it
>> into bootloader mode. (which it is already in)
>> 3. Factory reset (power on while holding SHIFT/LO button). Never got the
>> EE
>> INIT message.
>> 4. Uninstall and re-install K3 Utility and try 1-3 again.
>> 5. Uninstall and re-install front panel assembly; try 1-3 again.
>>
>> K3 Utility is still trying to connect and the TX LED is still flashing.?
>> Any
>> ideas before I call tech support on Monday?? Thanks.
>>
>> --
>> 73,
>> Mike Cizek W?VTT
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:
>
>> Elecraft at .qth
>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to
>
>> richarddw1945@
>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:
>
>> Elecraft at .qth
>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to
>
>> lists+1215531472858-365791 at .nabble
>
>
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
>
>
> ------------------------------
>
> Message: 19
> Date: Sun, 30 Sep 2018 19:41:04 -0700 (MST)
> From: John_N1JM <johnn1jm at gmail.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 Stuck in MCU Load - SOLVED
> Message-ID: <1538361664631-0.post at n2.nabble.com>
> Content-Type: text/plain; charset=UTF-8
>
> Whoops! It is there.Sorry.
>
> John N1JM
>
>
> Mike Cizek W0VTT wrote
>> Many thanks for all the replies.  K8ZTT had the correct answer and I am
>> now
>> up and running again.
>>
>> --
>> 73,
>> Mike Cizek W?VTT
>> ________________________________________
>> From: RIchard Williams [mailto:
>
>> richarddw1945@
>
>> ]
>> Sent: Saturday, September 29, 2018 19:21
>> To:
>
>> mgcizek@
>
>> ;
>
>> elecraft at .qth
>
>> Subject: Re: [Elecraft] K3 Stuck in MCU Load
>>
>> IF you are using the USB connection to the computer, you need to either
>> switch to the RS 232 port and use that;? OR take the cover off the K3 and
>> move the little slide switch on the KIO3B board to the opposite position.?
>> You can then use the USB method.? ?After you have re-installed the
>> firmware,
>> move the switch back to the other position.
>>
>> IF your KIO3B board does not have the small switch,? it is an older board
>> and you have to use a RS232 cable.? Check with Elecraft, and they will
>> probably switch boards to the newer one with the switch.
>>
>> I had the same issue awhile back.
>>
>> Dick, K8ZTT
>>
>> Sent from Yahoo Mail on Android
>>
>> On Sat, Sep 29, 2018 at 11:45, Mike Cizek W0VTT
>> &lt;
>
>> mgcizek@
>
>> &gt; wrote:
>> Greetings -
>>
>> I appear to have really #@(*)(*%&ed up my K3.? While updating the
>> firmware,
>> I accidentally hit either a key on the computer keyboard or one of the
>> mouse
>> buttons.? The K3 Utility window "grayed out" and the K3 is stuck in MCU
>> Load, no backlight, TX LED flashing.
>>
>> Setup: Astron 50A PSU; K3 # 2768 with new KIO3B board; direct USB
>> connection
>> to Lenovo Thinkpad running WIN7 Home Premium; K3 Util v 1.16.7.25.?
>> Computer
>> and K3 Utility both recognize the COM port; latest FTDI drivers installed.
>>
>> Yes, I know there is supposed to be a cure for this, but it didn't work.?
>> I
>> tried:
>>
>> 1. Restarting both the computer and the K3 a few times.
>> 2. Remove & reconnect power supply from K3, hold POWER button to force it
>> into bootloader mode. (which it is already in)
>> 3. Factory reset (power on while holding SHIFT/LO button). Never got the
>> EE
>> INIT message.
>> 4. Uninstall and re-install K3 Utility and try 1-3 again.
>> 5. Uninstall and re-install front panel assembly; try 1-3 again.
>>
>> K3 Utility is still trying to connect and the TX LED is still flashing.?
>> Any
>> ideas before I call tech support on Monday?? Thanks.
>>
>> --
>> 73,
>> Mike Cizek W?VTT
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:
>
>> Elecraft at .qth
>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to
>
>> richarddw1945@
>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:
>
>> Elecraft at .qth
>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to
>
>> lists+1215531472858-365791 at .nabble
>
>
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
>
>
> ------------------------------
>
> Message: 20
> Date: Mon, 1 Oct 2018 10:44:50 -0400
> From: Bob Witmer <witmerjr at gmail.com>
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] KAT500 For Sale
> Message-ID: <C5A78E89-2AC6-4F6B-BC54-E85720E2C0C8 at gmail.com>
> Content-Type: text/plain;	charset=utf-8
>
> Hello,
>
> Selling factory assembled SN18XX, KAT500 for friend leaving the hobby for 
> personal reasons.
>
> Was little used with a IC746PRO at a maximum power level of 100 watts or so 
> - only on SSB.
>
> Works great - has latest version 01.75 firmware.
>
> Has a slight scratch on the right side - and a tiny ?smudge? near the back 
> of the top cover.
>
> Includes original Manual, unused KXUSB Interface cable assembly and RCA to 
> RCA PA KEY cable. No original factory shipping box but will be well packed 
> for shipment.
>
> Price: $550 OBO, USPS money order - or check, plus shipping 8 Lbs from 
> 19446.  No PayPal.
>
> Please respond off list - I can send picts if you like.
>
> Thanks & 73
>
> Bob W3RW
>
>
>
> ------------------------------
>
> Message: 21
> Date: Mon, 1 Oct 2018 11:49:24 -0400
> From: "Mike Greenway" <K4PI at BELLSOUTH.NET>
> To: <elecraft at mailman.qth.net>
> Subject: [Elecraft] CODEC
> Message-ID: <BC48D580FA3F481690BFFE419ED4CCEC at SHACK>
> Content-Type: text/plain;	charset="Windows-1252"
>
> I have used for years a K3 on EME with WSJT using Line In/Out audio.  
> Recently got a K3S and I am now using USB (CODEC) audio in and out of the 
> radio.  In WSJT-10 they have Rate In/Rate Out monitors that should normally 
> run at 1.000. Using the K3 analog audio these always stayed right on 1.000 
> but now that I am using the USB audio they are jumping around quite often 
> and getting out of range indicated in WSJT with a red marker.  I have tried 
> two different computers and the same result.  I tried changing the sample 
> rate in the computer audio settings but no change in the problem.  I plan 
> to go back to analog Line In/Out on the K3S unless someone has an idea on 
> how to settle down the Rate In/Out fluctuations.  I have not found anything 
> in the K3S that might affect this.  You can reply off line if you like.  73 
> Mike K4PI
>
> ------------------------------
>
> Message: 22
> Date: Mon, 1 Oct 2018 16:10:30 +0000
> From: David Olean <k1whs at metrocast.net>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Eagles Peaceful Easy Feeling live
> Message-ID: <234eb5de-7eb9-5d9e-bac7-2415bdef8b89 at metrocast.net>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> John,
>
> Thanks for that post.? The B Bender, while not Elecraft related, sure
> was an interesting wrinkle in guitar tech, and all from the minds of
> Clarence White and Gene Parsons.? Clarence White was a huge presence
> tragically cut short at the age of 29.? I learn so much from this reflector.
>
> Dave K1WHS
>
>
>
> On 10/1/2018 12:52 AM, John Dolan wrote:
>> Notice how Bernie pulls his left shoulder and you can see how the B string 
>> Bender works.
>>
>> https://www.youtube.com/watch?v=byZn1KBzdeI&list=RDR4qHhFuxFpw&index=6
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k1whs at metrocast.net
>>
>
>
>
> ------------------------------
>
> Message: 23
> Date: Mon, 1 Oct 2018 13:36:10 -0400 (EDT)
> From: ROBERT MUELLER <k8rgm at comcast.net>
> To: Mike Greenway <K4PI at BELLSOUTH.NET>, elecraft at mailman.qth.net
> Subject: Re: [Elecraft] CODEC
> Message-ID: <295732766.33420.1538415370266 at connect.xfinity.com>
> Content-Type: text/plain; charset=UTF-8
>
> Mike, I would be interested in what you find.  Since Microsoft and then HRD 
> did upgrades I have not been able to get WSJT to work with HRD and my K3S, 
> therefore, the logging from FT* to HRD will not work.  When I try to set 
> things up I get a message:   Hamlib error: IO error while opening 
> connection to rig.  I am running a USB cable which worked fine until all 
> the upgrades.  Very interested in what you find.
> Bob, k8rgm at comcast.net
>> On October 1, 2018 at 11:49 AM Mike Greenway <K4PI at BELLSOUTH.NET> wrote:
>>
>>
>> I have used for years a K3 on EME with WSJT using Line In/Out audio.  
>> Recently got a K3S and I am now using USB (CODEC) audio in and out of the 
>> radio.  In WSJT-10 they have Rate In/Rate Out monitors that should normally 
>> run at 1.000. Using the K3 analog audio these always stayed right on 1.000 
>> but now that I am using the USB audio they are jumping around quite often 
>> and getting out of range indicated in WSJT with a red marker.  I have tried 
>> two different computers and the same result.  I tried changing the sample 
>> rate in the computer audio settings but no change in the problem.  I plan 
>> to go back to analog Line In/Out on the K3S unless someone has an idea on 
>> how to settle down the Rate In/Out fluctuations.  I have not found anything 
>> in the K3S that might affect this.  You can reply off line if you like.  73 
>> Mike K4PI
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k8rgm at comcast.net
>
>
> ------------------------------
>
> Message: 24
> Date: Mon, 1 Oct 2018 14:42:27 -0500
> From: Bob McGraw K4TAX <rmcgraw at blomand.net>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] CODEC
> Message-ID: <c945e423-0b08-db30-073e-bac9f788ec92 at blomand.net>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> While I use both WSJT-X, V1.9.1,? and HRD, I allow WSJT to create and
> save its own log.? Then I transfer the entries from the WSJT log to my
> other log system.? That then uploads the selected entries to LOTW.???
> I've more often than not found that if I allow one software to run
> within or under another software, there's just two many cooks in the
> kitchen tasting the pot.???? In other words, I run WSJT as a stand a
> lone application and do not have any conflicts.? The operating system is
> a current version of Windows 10 with all of their updates.
>
> As suggestions, I would open WSJT as a stand a lone and see if it
> connects to the rig and operates correctly.?? Then close WSJT and open
> HRD using one of its modes, i.e. PSK-31, and see if it operates
> correctly.??? If so on both, and mine does, then there is no specific
> issue with either application or the computer or the radio.?? I use the
> USB communication with my K3S.? Then with both applications running I
> find is the area where the hand shake is supported to occur but indeed a
> fist fight breaks out.?? That says HRD will need to be update in order
> for Windows 10 to handle the activity.? The bottom line, when Microsoft
> updates Windows 10, all other application software is likely in need of
> an update as well.
>
> Good luck in resolving the issue.
>
> 73
>
> Bob, K4TAX
>
>
> On 10/1/2018 12:36 PM, ROBERT MUELLER wrote:
>> Mike, I would be interested in what you find.  Since Microsoft and then HRD 
>> did upgrades I have not been able to get WSJT to work with HRD and my K3S, 
>> therefore, the logging from FT* to HRD will not work.  When I try to set 
>> things up I get a message:   Hamlib error: IO error while opening 
>> connection to rig.  I am running a USB cable which worked fine until all 
>> the upgrades.  Very interested in what you find.
>> Bob, k8rgm at comcast.net
>>> On October 1, 2018 at 11:49 AM Mike Greenway <K4PI at BELLSOUTH.NET> wrote:
>>>
>>>
>>> I have used for years a K3 on EME with WSJT using Line In/Out audio.  
>>> Recently got a K3S and I am now using USB (CODEC) audio in and out of the 
>>> radio.  In WSJT-10 they have Rate In/Rate Out monitors that should normally 
>>> run at 1.000. Using the K3 analog audio these always stayed right on 1.000 
>>> but now that I am using the USB audio they are jumping around quite often 
>>> and getting out of range indicated in WSJT with a red marker.  I have tried 
>>> two different computers and the same result.  I tried changing the sample 
>>> rate in the computer audio settings but no change in the problem.  I plan 
>>> to go back to analog Line In/Out on the K3S unless someone has an idea on 
>>> how to settle down the Rate In/Out fluctuations.  I have not found anything 
>>> in the K3S that might affect this.  You can reply off line if you like.  73 
>>> Mike K4PI
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to k8rgm at comcast.net
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rmcgraw at blomand.net
>>
>
>
>
>
> ------------------------------
>
> Message: 25
> Date: Mon, 1 Oct 2018 12:58:51 -0700
> From: "Rick Bates (WA6NHC)" <wa6nhc at gmail.com>
> To: Bob McGraw K4TAX <rmcgraw at blomand.net>
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] CODEC
> Message-ID: <ED23ED6D-377E-415B-BBF1-6DD5CE5BB697 at gmail.com>
> Content-Type: text/plain;	charset=utf-8
>
> I?ve had zero issues with WSJT-X over HRD and now that the logging hooks 
> were added to HRD, no more importing logs (or a third party program to link 
> logs) is required.
>
> It just works.
>
> Rick WA6NHC
>
> Smell Czech correction happen
>
>> On Oct 1, 2018, at 12:42 PM, Bob McGraw K4TAX <rmcgraw at blomand.net> wrote:
>>
>> While I use both WSJT-X, V1.9.1,  and HRD, I allow WSJT to create and save 
>> its own log.  Then I transfer the entries from the WSJT log to my other log 
>> system.  That then uploads the selected entries to LOTW.    I've more often 
>> than not found that if I allow one software to run within or under another 
>> software, there's just two many cooks in the kitchen tasting the pot.     
>> In other words, I run WSJT as a stand a lone application and do not have 
>> any conflicts.  The operating system is a current version of Windows 10 
>> with all of their updates.
>>
>> As suggestions, I would open WSJT as a stand a lone and see if it connects 
>> to the rig and operates correctly.   Then close WSJT and open HRD using one 
>> of its modes, i.e. PSK-31, and see if it operates correctly.    If so on 
>> both, and mine does, then there is no specific issue with either 
>> application or the computer or the radio.   I use the USB communication 
>> with my K3S.  Then with both applications running I find is the area where 
>> the hand shake is supported to occur but indeed a fist fight breaks out.   
>> That says HRD will need to be update in order for Windows 10 to handle the 
>> activity.  The bottom line, when Microsoft updates Windows 10, all other 
>> application software is likely in need of an update as well.
>>
>> Good luck in resolving the issue.
>>
>> 73
>>
>> Bob, K4TAX
>>
>>
>>> On 10/1/2018 12:36 PM, ROBERT MUELLER wrote:
>>> Mike, I would be interested in what you find.  Since Microsoft and then HRD 
>>> did upgrades I have not been able to get WSJT to work with HRD and my K3S, 
>>> therefore, the logging from FT* to HRD will not work.  When I try to set 
>>> things up I get a message:   Hamlib error: IO error while opening 
>>> connection to rig.  I am running a USB cable which worked fine until all 
>>> the upgrades.  Very interested in what you find.
>>> Bob, k8rgm at comcast.net
>>>> On October 1, 2018 at 11:49 AM Mike Greenway <K4PI at BELLSOUTH.NET> wrote:
>>>>
>>>>
>>>> I have used for years a K3 on EME with WSJT using Line In/Out audio.  
>>>> Recently got a K3S and I am now using USB (CODEC) audio in and out of the 
>>>> radio.  In WSJT-10 they have Rate In/Rate Out monitors that should normally 
>>>> run at 1.000. Using the K3 analog audio these always stayed right on 1.000 
>>>> but now that I am using the USB audio they are jumping around quite often 
>>>> and getting out of range indicated in WSJT with a red marker.  I have tried 
>>>> two different computers and the same result.  I tried changing the sample 
>>>> rate in the computer audio settings but no change in the problem.  I plan 
>>>> to go back to analog Line In/Out on the K3S unless someone has an idea on 
>>>> how to settle down the Rate In/Out fluctuations.  I have not found anything 
>>>> in the K3S that might affect this.  You can reply off line if you like.  73 
>>>> Mike K4PI
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> Message delivered to k8rgm at comcast.net
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to rmcgraw at blomand.net
>>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to wa6nhc at gmail.com
>
>
> ------------------------------
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/elecraft
> You must be a subscriber to post.
> Elecraft web page: http://www.elecraft.com
>
> End of Elecraft Digest, Vol 174, Issue 1
> ****************************************