[Elecraft] SWR - Numerical Indication

[Bob McGraw K4TAX]

What happened to using a Simpson 260 or 270 or Triplet 603? Those are 
actually better for finding a peak or null, which in both cases are only 
relative.  If one works on HV amps as I do from time to time, you'll 
find the life of a DVM to be ........zap.

73

Bob, K4TAX



On 11/30/2018 11:54 AM, ANDY DURBIN wrote:
> "Those extra digits on your meter may be meaningless."
>
> They may be meaningless or they could be very useful. Finding a peak or null, or looking for any small amplitude change, does not require absolute accuracy but high resolution can be useful.
>
> "A freebie Harbor Freight digital voltmeter appears to have a helluva lot better accuracy than reality."
>
> What is important is knowing what you want to measure and how useful your instrument is for making that measurement. For example I have an LP 100A , spectrum analyzer,  and a digital storage scope but the multimeter I usually use is a freebie from Harbor Freight.  I have quite a few of these and measurements are remarkably consistent between meters.  The only one I found to be bad had a very interesting anomaly.  The display acted as a photo cell and skewed the readings if used in direct sunlight!  Indoors it was as good (or bad) as all the others.
>
> A mistake many seem to make is to assume that something that is calibrated is therefore accurate.  Typically a calibrated instrument is only as good as the manufacturer's specification.  A 20% instrument is still a 20% instrument even if it has a current calibration certificate.  What calibration does is weed out the instruments that no longer meet the manufacture's specification and brings them back to that specification level.
>
> It used to wind me up that at work I was required to use a DVM with a current calibration certificate to check whether a signal was in asserted or non asserted state.  Any instruments that were not in calibration were routinely rounded up by the metrology lab police.  Few instruments suddenly change their properties on the day the calibration certificate expires.
>
> Andy k3wyc
>
>
>
>
>      
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>