[Elecraft] KPA-1500 issues

[Wes Stewart]

I fail to see what that will prove. The only length that will do anything 
exciting is the 1/4 wavelength line and even that doesn't affect the SWR.  The 
other two will just repeat (less loss) on the input side, what terminates the 
load side.

Wes  N7WS

On 11/27/2018 3:51 PM, Michael Walker wrote:
> If you truly want to understand SWR, I recommend you pick a frequency and
> make up a 1/4, 1/2 and 1 wavelength sections of 50ohm coax.
>
> Then measure the SWR at those points into various different resistive
> loads, like 10, 25, 50, 75, 100, 150 and 200 ohms.
>
> I think you will find the results very interesting.
>
> Mike va3mw
>