[Elecraft] Funky CW from K3

[Don Wilhelm]

Mark,

At what keying speeds?

See the K3 menu CONFIG: CW QRQ.  That mode will allow clean CW keying up 
to 100 WPM.  However, the transmit and receive frequencies must be 
shifted with each code element, and further if RIT, SPLIT or XIT are 
turned on, QRQ mode will be automatically turned off.

For the best results for high speed CW, install the new synthesizer(s) 
in a K3 that has not yet been upgraded.  The frequency can be changed 
more quickly than with the old synthesizer.

73,
Don W3FPR

On 11/27/2018 8:01 AM, Mpridesti via Elecraft wrote:
> Been having issues with the quality of the CW sending from my K3. Still chasing down other possible fixes but recently heard that there was a problem sending over 30 wpm with RIT on?  What is the story on this and fix?
> 
> Regards,
> Mark, K1RX
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>