[Elecraft] KX3/SignaLink issues....

[Don Wilhelm]

Tom,

Connect the KXUSB cable between your computer and and the KX3 (The same 
connections you would use for loading firmware).
Put the COM port number that your computer assigned to the KXUSB into 
Hamlib and see if it connects.
If you still cannot connect, start KX3 Utility and see if that can 
connect - if it does, then you have some kind of configuration problem 
with Hamlib (in other words, the KX3 is working fine).

Set the KX3 to DATA A data submode.
For setting the audio levels, please refer to my website www.w3fpr.com. 
Click on the last article in the left column.

73,
Don W3FPR

On 11/23/2018 9:36 AM, Tom Francis, W1TEF wrote:
> Season's Greetings to everyone on the list.
> 
> I've been trying to set up for digital communications and I
> am having some trouble getting the computer to communicate
> with the KX3.
> 
> I keep getting hamlib errors - the latest is "communications timed
> out while opening connection to rig"....
>