[Elecraft] K3S and N1MM+ on cw with no interface

[Jim Cary]

John,

Thanks.  That set up works.

73,

Jim


> On Nov 22, 2018, at 2:18 PM, John Simmons <jasimmons at pinewooddata.com> wrote:
> 
> Jim,
> 
> I have this exact setup and used it with success in the CW SS contest. Here's what you need to know once you have the K3S talking to N1MM:
> 
> On the K3S, navigate to the 'PTT-KEY' Config option and set it to 'rts-dtr'. Leave VOX turned off.
> 
> In N1MM:
> <image.png>
> with the port to match your K3S and SOxx set as desired, then:
> 
> <image.png>
> 
> N1MM will send PTT and CW via the USB port. I have a K3 (not S) but the only difference in this case is your radio has a built-in USB to serial converter.
> 
> 73,
> -John NI0K
> 
> 
> Jim Cary wrote on 11/22/2018 10:46 AM:
>> I’m trying to get my K3S and N1MM+ to work on cw without an interface (which I have used in the past).  I’ve tried a couple of the suggestions I’ve seen on  the reflector but none of them seem to work.
>> 
>> I’m sure someone has figured out an easy way to do this and would appreciate the info.
>> 
>> Thanks,
>> 
>> Jim
>> W2SM
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft <http://mailman.qth.net/mailman/listinfo/elecraft>
>> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
>> Post: mailto:Elecraft at mailman.qth.net <mailto:Elecraft at mailman.qth.net>
>> 
>> This list hosted by: http://www.qsl.net <http://www.qsl.net/>
>> Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html>
>> Message delivered to jasimmons at pinewooddata.com <mailto:jasimmons at pinewooddata.com>