[Elecraft] Data troubles

[Martin Sole]

Well done Richard. Gold star!

SYNC DT.

Don't ask, I have no idea. MMTTY demod was set correct, I use 915Hz but 
the TX audio was different, like 2125Hz.

Panic over hihi!

73
Martin, HS0ZED


On 20/11/2018 10:48, Richard Ferch wrote:
> There is a narrow transmit AF filter configurable in AFSK A. If this filter
> is turned on, you must keep your transmit audio frequency within the filter
> bandpass, otherwise there will be nothing transmitted. Set your RTTY
> software's audio frequency to match the K3's PITCH setting in AFSK A and
> don't let it move around. You may need to disable AFC in the RTTY software,
> and avoid the temptation to tune by clicking in the waterfall - use the
> radio's tuning knob, the same as you would in FSK D.
>
> 73,
> Rich VE3KI
>
> HS0ZED wrote:
>
> In summary, RX works fine both modes
> TX works fine in DATA A
> TX does not work other than trigering VOX in AFSK A.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hs0zed at gmail.com