[Elecraft] Data troubles

[Nr4c]

Check the DATA Sub-mode. You may be thinking AFSK but the software may reset to FSK D and that doesn’t require audio into the sound system. 

In the TX monitor, Do you hear diddles or just a single tone?

Sent from my iPhone
...nr4c. bill


> On Nov 19, 2018, at 10:26 PM, Martin Sole <hs0zed at gmail.com> wrote:
> 
> Can anyone help with a quick DATA mode problem.
> 
> I've always used AFSK but it seems to have stopped working on transmit. I can set DATA A and then send audio from the PC into the radio. It transmits fine, no problem. Just switching to data mode AFSK and then sending audio. the vox operates as before but no modulation, no output.
> 
> In summary, RX works fine both modes
> TX works fine in DATA A
> TX does not work other than trigering VOX in AFSK A.
> 
> Nothing else changes other than the mode on the front panel. Line in, level all set the same.
> 
> Figure I must be doing something dumb.
> 
> Any help?
> 
> Thanks
> Martin, HS0ZED
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com