[Elecraft] KAT-500 auto-tuning issue with SSB vs. CW

[ANDY DURBIN]

"The KAT500 will follow your frequency and change to the pre-set L/C values for that band and antenna automatically."


Yes that's all wonderful if a K3, or some other means, provides the TX frequency to the KAT500. The OP does not say he is using a K3 and does not say that any other frequency interface is being used.


it was my assumption, based on the information in the first post, that RF sensing is being used and it is not working for the SSB phone signal.


Andy, k3wyc