[Elecraft] WSJT-X Disabling TX INHIBIT on K3S

[John Stengrevics]

Tom,

I was told that.  All I can say is that there is no delay from the K3S when I transmit on WSJT-X.  I increased the delay to .3 seconds under ADVANCED in WSJT-X settings and the problem is solved.

73,

John
WA!EAZ

> On Nov 13, 2018, at 11:12 PM, Tom <tomb18 at videotron.ca> wrote:
> 
> Hi,
> WSJT-X does not touch TX Inhibit.
> The only command that WSJT-X sends is a TX; command to enter transmit mode or it asserts DTR or RTS.  The same is true for Yaesu and Icom transceivers. Now if the radio does this itself behind the scenes, that is another story. But 100% for sure WSJT-X does not send the TX inhibit menu command.
> 73 Tom
> va2fsq.com
> 
> 
> -----Original Message----- From: John Stengrevics
> Sent: Tuesday, November 13, 2018 2:35 PM
> To: Elecraft Reflector
> Subject: [Elecraft] WSJT-X Disabling TX INHIBIT on K3S
> 
> I asked this question previously and was told that the WSJT-X would not effect TX INHIBIT on the K3S.
> 
> In trying to confirm this just now, TX INHIBIT is clearly disabled when I call CQ on FT8 digital mode.
> 
> Any thoughts?
> 
> John
> WA1EAZ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to tomb18 at videotron.ca 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>