[Elecraft] WSJT-X Disabling TX INHIBIT on K3S

[ANDY DURBIN]

"How does one implement TX Inhibit on a Kenwood TS-590?"


On a TS-590S TX inhibit is menu 60. The EX command is used to change menu settings over CAT. For a TS-590S -


EX06000000; reads the inhibit status

EX060000001; sets TX inhibit

EX060000000; clears TX inhibit


For a TS-590SG the menu number is 66 so substitute 060 with 066 in the commands above.


Note that, like almost all menu selections, the inhibit will only apply to the menu (A or B) in which it was set. To be safe it should be applied to both menus.


Andy k3wyc