[Elecraft] WSJT-X Disabling TX INHIBIT on K3S

John Stengrevics jstengrevics at comcast.net
Tue Nov 13 15:56:26 EST 2018


Don,

Thanks for that.  

Just in case anyone else asks, I thought you could only select .1 or .2 seconds delay under ADVANCED settings in WSJT-X.  It turns out, you can enter any delay you want.  So, problem solved.

73,

John
WA1EAZ

> On Nov 13, 2018, at 2:54 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> John,
> 
> Contact the WSJT-X developers to see if any command they issue would disable K3 TX Inhibit. Since the exchange on FT8 is so rapid, my guess is that they may very well disable TX Inhibit as a "safety" measure.
> 
> There is nothing about DATA A mode operation of the K3/K3S that would cause TX Inhibit to be disabled.
> 
> 73,
> Don W3FPR
> 
> On 11/13/2018 2:35 PM, John Stengrevics wrote:
>> I asked this question previously and was told that the WSJT-X would not effect TX INHIBIT on the K3S.
>> In trying to confirm this just now, TX INHIBIT is clearly disabled when I call CQ on FT8 digital mode.
>> Any thoughts?



More information about the Elecraft mailing list