[Elecraft] K3 + SDRPlay's RSP1 as panadaptor

[Bob McGraw K4TAX]

If it will tune to the IF frequency of about 8.2 MHz.  From experience, 
without an up conversion added, they won't tune that low.

73

Bob, K4TAX


On 11/8/2018 9:57 AM, WW3S wrote:
> Can you use one of the less expensive sdr dongles in a similar way?
>
> Sent from my iPad
>
>> On Nov 8, 2018, at 10:19 AM, John Simmons <jasimmons at pinewooddata.com> wrote:
>>
>> Isaac,
>>
>> I did exactly that, using the HDSDR software. I used the RX ANT output (must activate it from the front panel of the K3) to feed the antenna of the RSP1. You use a BNC tee to feed the antenna back into the K3. Purists use an RF splitter instead of a tee. I have a YouTube video that shows the results: https://www.youtube.com/watch?v=KusmkeLdfwE
>>
>> If you need further help, let me know.
>>
>> 73,
>> -John NI0K
>> TL_Netvision wrote on 11/8/2018 8:22 AM:
>>> Hello all,
>>>
>>> I am considering using an RSP1 SDR with my K3. I will probably use HDSDR
>>> software to start with.
>>> Can someone point me in the right direction for the whole procedure?
>>>
>>> TIA
>>> Isaac, 4Z1TL
>>>
>>>
>>> ---
>>> This email has been checked for viruses by Avast antivirus software.
>>> https://www.avast.com/antivirus
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to jasimmons at pinewooddata.com
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ww3s at zoominternet.net
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>