[Elecraft] K3 + SDRPlay's RSP1 as panadaptor

[John Simmons]

Isaac,

I did exactly that, using the HDSDR software. I used the RX ANT output 
(must activate it from the front panel of the K3) to feed the antenna of 
the RSP1. You use a BNC tee to feed the antenna back into the K3. 
Purists use an RF splitter instead of a tee. I have a YouTube video that 
shows the results: https://www.youtube.com/watch?v=KusmkeLdfwE

If you need further help, let me know.

73,
-John NI0K
TL_Netvision wrote on 11/8/2018 8:22 AM:
> Hello all,
>
> I am considering using an RSP1 SDR with my K3. I will probably use HDSDR
> software to start with.
> Can someone point me in the right direction for the whole procedure?
>
> TIA
> Isaac, 4Z1TL
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jasimmons at pinewooddata.com