[Elecraft] K3 Sticky Power Control

[Nr4c]

Check the knob for cracks. Many K3S suffer from cracked knobs. If yours is cracked, call Madelyn at Elecraft and explain which knob(s) are cracked and they will send you replacement(s). 

Sent from my iPhone
...nr4c. bill


> On Nov 7, 2018, at 8:46 PM, engineercm <clark.macaulay at gmail.com> wrote:
> 
> Hi, Grant.
> 
> Great suggestion.  MON and CMP functions work fine.  The PWR behavior is
> that sometimes the power level indicated on the display will not move (or
> move a few watts) no matter how much I turn the knob.  Other times it may
> move down 10w or so and then won't go lower.  
> 
> It seems to be intermittent.  I don't need to adjust the PWR often: only
> when I'm running QRP with it instead of the K2.  Setting up Macro for that
> is probably the easiest solution.  
> 
> Clark/WU4B
> K3 #3645
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com