[Elecraft] KPA500 Fuse holder frustration!

[Michael Walker]

I just changed mine from 120v to 220v today and yes, they tilt up a bit,
but I had no issue closing the door.

I see you figured it out.

Mike va3mw


On Tue, Nov 6, 2018 at 10:27 PM Macy monkeys <macymonkeys at charter.net>
wrote:

> I got past the problem. I started the top and bottom door sides over the
> end of the fuses BEFORE pushing the fuseholder into place. To do this, the
> fuse holder had to be sticking out about 3/32"...
>
> John K7FD
>
> > On Nov 6, 2018, at 7:05 PM, Macy monkeys <macymonkeys at charter.net>
> wrote:
> >
> > The end of 6 amp fuses are bucking upward towards the back panel keeping
> me from closing door. What is the secret? I'd love to play with this new
> amp but I'm stymied...
> >
> > John K7FD
> >
> >
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to macymonkeys at charter.net
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to va3mw at portcredit.net
>