[Elecraft] P3SVGA and 20 inch Display

[donovanf at starpower.net]

Hi Phil, 


The details you missed are here: 


http://www.elecraft.com/manual/P3%20Xmit%20Mon%20FAQ-ver-A-7.pdf 


The TX Monitor works great with the P3 display, no need for it to 
be displayed on a large monitor. On the other hand, the other P3 
displays benefit greatly from the SVGA option. 


73 
Frank 
W3LPL 

----- Original Message -----

From: "Phil Hystad" <phystad at mac.com> 
To: "Dennis Moore" <dennis at mail4life.net> 
Cc: "Elecraft" <Elecraft at mailman.qth.net> 
Sent: Thursday, March 29, 2018 11:54:06 PM 
Subject: Re: [Elecraft] P3SVGA and 20 inch Display 

Dennis, 

Thanks, so SVGA display has zero knowledge of the existence of the TX Monitor information (not the RF Envelope and not the TX PEP/SWR windows). 

Was there any sort of statement from Elecraft on the non-support of SVGA of the TX Monitor? If there was I most likely missed it. If I remember, TX Monitor came after the advent of the SVGA option. 

However, not big deal as, like you said, there is always the P3 to look at if needed. 

73, phil 


> On Mar 29, 2018, at 4:36 PM, Dennis Moore <dennis at mail4life.net> wrote: 
> 
> TX Monitor does not appear on the external monitor. If I really need to look at it I check the P3, otherwise I'm always checking the external monitor. It's worth it even without the TX monitor display. 
> 
> 73, Dennis NJ6G 
> 
> 
> On 3/29/2018 16:31, Phil Hystad wrote: 
>> I am considering finally getting the P3SVGA option for my P3. I do have a 20 inch HDMI display supporting a variety of resolutions. I plan to use with an SVGA to HDMI conversion cable. 
>> 
>> So, I am wondering how the P3 TX Monitor display shows up on the SVGA display. I assume either not at all or just like it does on my P3 window. Or, maybe different. For example, I use my P3 in the display mode that has the bar graphs showing PEP and SWR. Are these supported on the SVGA controlled display? 
>> 
>> It would be nice if there were some color images of the SVGA display showing actual signals that include the TX Monitor display information as well as TX and RX data decoding windows on the display. Do any of those exist? 
>> 
>> Thanks, 
>> 
>> 73, phil, K7PEH 
> 
> ______________________________________________________________ 
> Elecraft mailing list 
> Home: http://mailman.qth.net/mailman/listinfo/elecraft 
> Help: http://mailman.qth.net/mmfaq.htm 
> Post: mailto:Elecraft at mailman.qth.net 
> 
> This list hosted by: http://www.qsl.net 
> Please help support this email list: http://www.qsl.net/donate.html 
> Message delivered to phystad at mac.com 

______________________________________________________________ 
Elecraft mailing list 
Home: http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Elecraft at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 
Message delivered to donovanf at starpower.net