[Elecraft] K3 powers off when after several minutes of 12W carrier

[hawley, charles j jr]

How do we know that’s pushing it? Maybe the LPA is designed for 20 Watts and the K3 cuts them off at 12 Watts.

Chuck Jack 
KE9UW

Sent from my iPhone, cjack 

> On Mar 28, 2018, at 7:23 PM, "john at kk9a.com" <john at kk9a.com> wrote:
> 
> Instead of pushing the 12 watt PA this hard it would sure be nice (and
> cleaner) to have the option of using the KPA3A for 10-12 watts output.
> 
> John KK9A
> 
> 
> K7TV wrote:
> 
> I have been testing sustained power capabilities of wideband HF transformers
> for feeding EFHW antennas. This involves running high power through HF
> transformers back to back into a dummy load. When running 200W out of the
> KPA500, the K3 was indicating 12W, and I think that means the 100W PA was
> not operating. After a few minutes the K3 totally shut down. This had
> nothing to do with the transformers under test; I get the same result when
> running the KPA500 at 200W directly into the dummy load. After restart the
> K3 shows no sign of problem unless the 200W endurance test is run again.
> Then I increased power just a little bit so that the 100W stage kicked in. I
> got 300W out of the KPA500, and now the K3 keeps going without shutting
> down. I can see how 12W may be a bit much for the driver stage, but if so,
> shouldn't the 100W stage kick in sooner? Also, I expected the K3/KPA500
> combo to be able to produce any power level I wanted within its range. What
> I see is that when the 100W stage kicks in, the output (as seen on an analog
> meter) makes a big jump so that certain power levels cannot be achieved.
> 
> Thanks,
> Erik K7TV
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to c-hawley at illinois.edu