[Elecraft] KPA-1500 request

[Richard Thorne]

Dick,

Check out the 4O3A antenna genius.  There's a 2x8 and a 1x8 version.

You can control the switch's via one of three methods:

     - LAN - There's a Windows app to control the switch or a Flex 
transceiver can control it over the network
     - Point to point so you can use an 8 position switch
     - BCD

The above options are selected via a dip switch mounted in the switch 
itself.

Rich - N5ZC

On 3/28/2018 3:21 PM, Dick via Elecraft wrote:
> Since the KPA only has 2 Antenna jacks, I'd love to see Elecraft offer 1x8 and 2x8 Remote Antenna Switches with band data interface, if needed, so they arrive tested and ready to work with the K3. In the meantime, can anyone share which 1x8 or 2x8 Remote Antenna Switches and band data interface your using with your K3 and how time consuming it was to get the Antenna Switch configured?  Thanks & 73, Dick- K9OM
>
>
>   
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rthorne at rthorne.net