[Elecraft] KPA1500 questions...

[Don Butler]

Jason, the short answer is that when the KPA1500 and K3S (or K3) are
connected via the KPAK3AUX cable and your K3S config menu is set to "power
per band" the K3S will memorize two separate power settings per band .. one
which kicks in when the amp is set to "STBY" and the other when and the mode
switch is changed to "OPER"

Don, N5LZ

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jason Pecora
Sent: Monday, March 26, 2018 3:55 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] KPA1500 questions...

Group good evening. I have a certain style of operation and a question about
the KPA1500 I would like to ask in the group. My normal operation is the K3S
into a Palstar HF Auto that tunes several antennas on my property.
I have had a lot of amplifiers in the past, from solid state to tube amps.
Currently I'm running a OMpower 2000+ amplifier. My normal process is that I
have 2 memories set on the K-pod, one is that it puts the radio into tune
mode at 8 watts out. This 8w output tunes the HF auto with low power until
it gets a good match which is very quick. During this 8w tune I have the
amplifier in stand-by mode, and all set to tune it next. After the 8w tune,
I have the same button set up to "HOLD" the button for a 30w tune in which
then I tune the amplifier which is pretty much ready to go off of a list
that I compiled, just basically a touch up is all that is needed. The radio
stays at 30w after that tune and I'm ready to go... My question is this. Is
there an option with the KPA1500 that I don't have to reach over and keep
hitting stand-by on the amplifier every time I need to touch up the HF-Auto,
can I set up a K-pod button to do this, or a button on the K3S? So basically
does the K3S talk to the buttons on the KPA1500 so that I could create a
stand-by button on the K-pod...I'm right on the fence on a purchase and this
feature would really be of importance to me...

Jay KB8O
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to n5lz at comcast.net