[Elecraft] KX2 "HI CUR" Warning

[Nr4c]

Check every connection in any system. VSWR of 25.1 is normal for an “no antenna” condition at any connector. Something is disconnected. 

WIt’s this HI SWR you will get HI CUR warming as radio tries to develop power into the non-existing antenna. And you will not get much power developed. 

Sent from my iPhone
...nr4c. bill


> On Mar 25, 2018, at 9:32 AM, Chris <CGarbage1 at optonline.net> wrote:
> 
> My KX2 started now only reports 25.4-1 when attempting to tune my antenna. The value does not fluctuate during the tuning process.
> 
> During some transmit attempts (SSB, Power set to 3.0W), I received the "HI CUR"message. In general, my reported power output never gets above 0.5W, no matter what power settings are used.
> 
> Any help would be appreicated.
> 
> --Chris (KD2FLH)
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com