[Elecraft] K3S TX Noise Gate

[Richard]

Bill,

Tx EQ:
50  =  -16
100  =  -12
200  =  -6
400  =  0
800  =  0
1200  =  +3
2400  =  +9
3200  =  +12

This works well for me.

Richard - W4KBX


> On Mar 18, 2018, at 10:53 AM, Bill Johnson <k9yeq at live.com> wrote:
> 
> Do  you have the equalizer set higher levels or lower on the upper audio range?
> 
> 73,
> Bill
> K9YEQ
> 
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Richard
> Sent: Saturday, March 17, 2018 7:54 PM
> To: Elecraft Reflector <elecraft at mailman.qth.net>
> Subject: [Elecraft] K3S TX Noise Gate
> 
> When I listen to myself in the monitor while setting Tx EQ and compression, I hear the fans in the background, so I thought I’d try the Transmit Noise Gate.
> 
> I was a recording engineer, so I know what a gate is and what it should sound like. 
> 
> When I follow the manual instructions on how to access it through CONFIG TX GATE, how to tap 1 to turn it on and off, and how to use VFO A to adjust it, nothing happens. Zero. There is absolutely no gate action, no change in the sound as I run the adjustment from one end to the other.
> 
> What might I be doing wrong?
> 
> Richard - W4KBX
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message delivered to k9yeq at live.com