[Elecraft] k3S usb software silenced sidetone and no rf out

[Joe Subich, W4TV]

> Can it be that N1MM+ software changed this parameter in the K3S
> config?
It is not likely that N1MM+ changed a configuration value in the K3S
(I can not find any command that will allow a logging program to set
that configuration).

Note: the normal configuration for CW and PTT when using the RS-232
*or* USB virtual port with most software is PTT on RTS and CW on DTR.
For the K3/K3S that is CONFIG:PTT-KEY = rtS-dtR


73,

    ... Joe, W4TV


On 3/18/2018 9:14 AM, IK4EWX wrote:
> I have found that setting the config parameter PTT-KEY at OFF-RTS, the K3S
> keyed by TR4W software returned to transmit with rf ouput and with sidetone.
> I make the mistake of not taking note of the previous value, but setting
> OFF-RTS seem to have solved.
> Can it be that N1MM+ software changed this parameter in the K3S config?
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>