[Elecraft] RTTY issue (OT?)

[Martin Sole]

Rich, Jamie,

Many thanks, all good now.
It was AFSK A, just got confused as after exiting the menu it says DATA 
on the screen.

Of course it was (insert favourite name of some obscure person from 
history) law that I found out about NET shortly after posting. I guess I 
never needed that in the past as I had always used FSK. Will look into 
doing that with the K3 in future I think.

I now have it set at 915Hz as that sounds even better when trying to 
tune by ear. I'm not sure if there are any downsides to using lower 
tones but it does seem easier on the ears and to tune by.

Is there a way to set it to default to that? Honestly I've never dug 
that far into MMTTY. I'd like to set that up as part of my profile if it 
can be made to work that way.

Thanks
Martin, HS0ZED



On 17/03/2018 19:20, Richard Ferch wrote:
> I'm not sure why you are using DATA A instead of AFSK A, but ...
>
> If you don't want MMTTY to transmit on a different frequency from your
> receive frequency, turn NET on - in AFSK, that will force the TX to follow
> the RX. Also, you should tell MMTTY that your preferred frequency is 1275
> Hz. To do this, set your HAM default to 1275.
>
> A general rule for AFSK is: while S&P, turn NET on and AFC off; while
> CQing, turn NET off and either turn AFC on or leave AFC off and use RIT
> instead for off-frequency callers. Some software will switch the NET and
> AfC settings for you automatically between run and S&P modes.
>
> If you do use AFSK A instead of DATA A, you will have to change the K3's
> PITCH setting to 1275-170 from the default 2125-170.
>
> 73,
> Rich VE3KI
>
>
> HS0ZED wrote:
>
>> MMTTY is working fine in DATA A (AFSK) receive is no problem and
>> transmit too provided I use 2125Hz.
>>
>> I would prefer to use 1275Hz but when switching to transmit MMTTY keeps
>> jumping to 2125Hz. How to stop that?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hs0zed at gmail.com