[Elecraft] 2D Fasteners

[kevinr]

They are only able to connect one plane to another plane.  They cannot 
connect three planes at one time.  Making a 2D connection is what they do.

    Kevin.  KD5ONS


On 03/16/2018 11:47 AM, Wes Stewart wrote:
> I've never understood why a three-dimensional object is called "2D".
>
> On 3/16/2018 11:41 AM, EricJ wrote:
>> I bet they're proprietary to Elecraft, but I don't know that for 
>> sure. Easy to make if you have a drill press, hacksaw and 4-40 drill 
>> and tap. Hard to make without. If you make them, observe and measure 
>> very carefully. The holes are not centered on the block. They're 
>> offset ~1 mm from centerline. I forget exact dimensions. Be exact.
>>
>> Eric KE6US
>>
>>
>> On 3/16/2018 11:12 AM, G4GNX wrote:
>>> Does anyone know where I can buy a small quantity of the 2D 
>>> Fasteners that hold Elecraft cases together? These are the aluminum 
>>> blocks with 2 threaded holes on one pair of sides and 1 threaded 
>>> hole in the other pair of sides.
>>>
>>> Is there an alternative name for them? I tried Google and came up 
>>> with nothing.
>>>
>>> 73,
>>>
>>> Alan. G4GNX
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kevinr at coho.net
>