[Elecraft] 2D Fasteners

[EricJ]

I bet they're proprietary to Elecraft, but I don't know that for sure. 
Easy to make if you have a drill press, hacksaw and 4-40 drill and tap. 
Hard to make without. If you make them, observe and measure very 
carefully. The holes are not centered on the block. They're offset ~1 mm 
from centerline. I forget exact dimensions. Be exact.

Eric KE6US


On 3/16/2018 11:12 AM, G4GNX wrote:
> Does anyone know where I can buy a small quantity of the 2D Fasteners that hold Elecraft cases together? These are the aluminum blocks with 2 threaded holes on one pair of sides and 1 threaded hole in the other pair of sides.
>
> Is there an alternative name for them? I tried Google and came up with nothing.
>
> 73,
>
> Alan. G4GNX
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to eric.csuf at gmail.com
>