[Elecraft] kx3 with the krc2

[Don Wilhelm]

Noel,

You just need to tell Win4K3 software to use COM port 9 and all should 
work fine.

Be aware that if you plug that USB to serial adapter into another USB 
socket, the COM port assignment may be changed.

73,
Don W3FPR

On 3/16/2018 3:44 AM, NOEL POULIN wrote:
> Hi,
> I have connected the KX3 to the Krc2 Band Decoder.
> It is working ok now , thanks to Don W3FPR, and also to VIC VE3YT for 
> their help.
> I used a KXSER cable between the KX3 and the decoder and a serial cable 
> between the decoder to the pc.
> Vic told me what jumpers to use to make the decoder to work.Thanks 
> again. And Don also gave me a lot of infos..appreciated Don..
> Now I have to move this set up to a laptop computer, and there  is no 
> serial port on this laptop.
> I have in my shack an IOGEAR USB TO SERIAL adapter model GUC232A.
> I connect it to the lap top, and I SEE COM9 in the device manag of the 
> laptop computer.