[Elecraft] Switching RX ant between ports

[Bill Johnson]

I also use a switch and it is a great solution.

73,
Bill
K9YEQ

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of wb6rse1 at mac.com
Sent: Wednesday, March 14, 2018 1:33 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Switching RX ant between ports

I've used a switch and a magic "T." No need for either. "Wire-Or" the AUX and RX IN ports together with a BNC T connector and then to the RX Antenna. Works just fine.

GL - Steve WB6RSE




On Mar 14, 2018, at 9:06 AM, Bill Stravinsky via Elecraft <elecraft at mailman.qth.net> wrote:

I use a 2 position switch to send the rx antenna to the AUX or RX ant in jacks.  Its on the wall out of the way but easily accessible.I don't even label it.  It corresponds to the back of the K3.  Left is RX in and right is AUX.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to k9yeq at live.com