[Elecraft] K3 RS232 Question for Remoterig Users

[Fred C. Jensen]

No, a Y-cable won't work. I use an A- B switch [Amazon, about $20].  You will also need a USB cable to the PC if you're using a logging program with CAT control.

Fred K6DGW
Sparks NV

Ed G <ed.n3cw at gmail.com> wrote:
>Hello,
>     I am exploring some different options for remote control of a home station. After reviewing the Remoterig RRC-1258 manual, it appears that the cabling to the home station K3 is minimal, basically just a null modem connection from the K3 RS232 port to the Remoterig box.  To have a setup that does not require constantly connecting and disconnecting the cable, can I use a Y adapter, assuming that other external RS232 control/polling signals are turned off?  The Remoterig box doesn’t have a power on/off switch, so it might be powered up all the time, and I am wondering about potential conflicts should I use a Y cable.
>--Ed—
>
>     
>
>
>
>---
>This email has been checked for viruses by Avast antivirus software.
>https://www.avast.com/antivirus
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to k6dgw at foothill.net