[Elecraft] Cable for KX2 and KPXA-100

[Don Wilhelm]

Tim,

I suspect no one knows the answer because it has not been tested.
If you can find a 2 to 3 foot long TRRS plug to TRRS jack cable 
(extension cable), it should be easy enough to give it a try.  If it 
works, then it works.
If you have problems, be prepared to remove that extension to see if it 
is the problem.
This is not an official Elecraft answer, I am just indicating that there 
is an easy way to try the extension.

73,
Don W3FPR

On 3/9/2018 8:20 AM, Tim N9PUZ wrote:
> I have a KX2/KPXA-100 combination. I'd like to be able to physically
> separate the two more than the factory supplied cables will allow. Any
> problems with adding a 2 or 3 foot extension to the KX2ACBL data/control
> cable that runs between the two?