[Elecraft] BNC connector oddity on KX3
Don Wilhelm
donwilh at embarqmail.com
Thu Mar 8 15:44:00 EST 2018
Rich,
If the BNC connector rotates even a wee bit, that is the problem -
tighten the BNC jack. A good connection to the jack shell is required.
"Opening it up" is not a big deal - unless you have the 2 meter option -
just remove the bottom cover, no more complicated than changing batteries.
73,
Don W3FPR
On 3/8/2018 3:20 PM, rich hurd WC3T wrote:
> I have three more days of checking various configurations including binding
> post antennas, end fed half waves, opening the damn thing up... Thanks
> all for the suggestions.
>
> On Thu, Mar 8, 2018 at 2:50 PM, Walter Underwood <wunder at wunderwood.org>
> wrote:
>
>> Open it up and make sure that the antenna connector is securely connected
>> to the ATU board.
>>
>> wunder
>> K6WRU
>> Walter Underwood
>> CM87wj
>> http://observer.wunderwood.org/ (my blog)
>>
>>> On Mar 8, 2018, at 11:46 AM, GRANT YOUNGMAN <ghyoungman at gmail.com>
>> wrote:
>>>
>>> So was the antenna and related cabling/connectors good as verified by
>> your analyzer at the point of the radio connection? In some 60 years of
>> doing this, I have yet to find the radio to be the problem when it tells me
>> it’s looking into high SWR. There’s a first time for everything, course :-)
>>>
>>>
>>>> On Mar 8, 2018, at 2:23 PM, rich hurd WC3T <rich at wc3t.us> wrote:
>>>>
>>>> Okay, so I took the plunge and disconnected the KX3 to take with me on
>>>> vacation. Hooking it back up proved to be a tad problematic - SWRs of
>>>> 25:1 and no signals from any bands, anywhere. I'm now working through
>> what
>>>> options I have, starting with checking female connector deformation and
>>>> doing what I can to examine oxidation, and general quarrantining of
>> wires
>>>> and connectors.
>>>>
>>>> I also wrote to Elecraft to get a quote for a replacement BNC connector
>>>> with the LPF installed - worst case is I'll just start over again with a
>>>> new chassis connector.
>>>>
>>>> Ain't radio fun? :)
>>>>
>>>
>>> Grant NQ5T
>>> K3 #2091, KX3 #8342
>>>
>>>
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to wunder at wunderwood.org
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rich at wc3t.us
>>
>
>
>
More information about the Elecraft
mailing list