[Elecraft] K3 - PSK31

[Don Wilhelm]

Chuck,

It is the right address for the Elecraft Email Reflector.

Are you using DATA A mode?  If not you should be.
Do you have audio sufficient to drive the ALC meter up to 4 bars solid 
with the 5th bar flashing?

For more details go to my website www.w3fpr.com and scroll down to the 
last article in the left column - click for the link.

73,
Don W3FPR

On 3/6/2018 4:38 PM, Chuck Jones via Elecraft wrote:
> GD,
> 
> Hope this is right Email address.
> 
> I apparently have something set wrong on my K3 for PSK31.
> 
> Am using HRD & microKEYER (interfact)
> 
> Have no problem RX'ing
> 
> TX'ing seems to output as see TX on water fall and on Watt Meter
> however people locally don't see anything from me.
> 
> K3 is in PSK31 mode.
> 
> Obviously something is off, but it has been so long since I setup/used
> PSK31 I am lost.
> 
> 73, Chuck N7BV
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>