[Elecraft] KX3 AND BAND DECODER

[Joe Subich, W4TV]

 > What would be the easiest way....to have a band decoder... so all use
 > the same cat port....

microHAM USB Device Router provides two virtual serial (CAT) ports when
used with microHAM Station Master.  The primary CAT port can be used for
your logging software, the secondary CAT port can be used for OmniRig
(CW Skimmer).

Alternatively, since your logger (Win-Test) can use OmniRig as its rig
driver, you can connect both the logger and CW Skimmer to OmniRig and
use only the primary CAT port.

73,

    ... Joe, W4TV


On 3/4/2018 7:35 AM, NOEL POULIN wrote:
> Hello,
> I would like to use a band decoder with the KX3.
> Here is my setup for now.
> KX3...+plus logging software(using cat) +skimmer,also using cat)
> Now I want to add a ban decoder to the KX3...
> I do not want to use Win4k3.
> I would like to use a band decoder for example BandMaster3, or 
> StationMaster.
> What would be the easiest way....to have a band decoder... so all use 
> the same cat port....
> Thanks for the input..
>      Noel
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com