[Elecraft] KAT500 commands

[Don Wilhelm]

Harlan,

I don't believe that is available on a real time basis (which is what 
you apparently are seeking).

Yes, the K3 knows when the KAT500 has stopped tuning, but it is not 
available as a GET command.

73,
Don W3FPR

On 3/1/2018 6:02 PM, Harlan Sherriff via Elecraft wrote:
> Is there a GET command for either the K3 or KAT500 that will show when the tuner has completed a tune?
>