[Elecraft] Sound Card Problems

[Don Wilhelm]

Lee,

As you discovered, when the USB cable is not plugged in, the USB Audio 
CODEC is not shown in Device Manager.   That is normal.  Did I misread 
something?

73,
Don W3FPR

On 6/30/2018 10:48 AM, Lee Murrah wrote:
> I previously had a thread on problems I was having the internal sound card on FT8.  I was getting no output from the PC to the radio.  So thinking that the problem was how I had the internal sound card and WSJT-X set up, I switched back to using my SignaLink, which had worked perfectly before.  It worked fine for a while, but then the failed output problem returned. Mysteriously, it would start working again and then after a time fail again.
> 
> At one point I found that there were two USB Audio Codecs and the standard Realtek driver associated with the speaker settings.  I selected the one one not then i use, and the output returned. Then after another failure, I found that there was only one USB Audio Codec associated with the output.
>