[Elecraft] K3 and WSJT-X Split operation.

[Neil Zampella]

I can backup Don's statement about the K2.

I have my K2/100 working reliably with the KAT100, connected to the PC 
using a serial to USB adapter.   Using the DXLabs DX Commander to 
control the rig, and interface with WSJT-X, PTT is through CAT.

I can even work remotely using VNC, as the DX Commander allows me to 
adjust the power if necessary using a slider and the K2 command set.

Neil, KN3ILZ

On 6/29/2018 4:16 PM, Don Wilhelm wrote:
> Wes,
>
> I certainly did not realize that VOX was a no-no!
> In fact the DATA MODES section of the K3 manual clearly states "You cn 
> use either VOX or PTT."
> If your audio levels are correct, VOX should be no problem.
> I personally prefer PTT via CAT command.
>
> Now if you are using the K2, then I definitely recommend NOT using VOX 
> because it does not trigger reliably with DATA mode audio.
>
> 73,
> Don W3FPR
>
> On 6/29/2018 3:24 PM, Wes Stewart wrote:
>> I realize that Elecraft's position is that VOX is a no-no. 
>