[Elecraft] K3 and WSJT-X Split operation.

[Bob McGraw K4TAX]

No issues here with the K3S and WSJT-X in Hound mode.  I do use CAT 
control for PTT and not VOX.  SPLIT works just fine with no observed 
delays.  It may be enhanced by the fact that I'm not running any other 
applications, logging or such while working FT-8.  Logging is handled 
separately by a different application, somewhat manual,  and is not 
connected to the radio or WSJT-X software.

73

Bob, K4TAX


On 6/29/2018 12:44 PM, Wes Stewart wrote:
> Do you have the same mode selected for both VFOs?  Give the A -> B a 
> double tap to be sure. Understand that in Hound mode you need to set 
> your TX frequency above 1000 Hz.  If the Fox calls you he will move 
> your TX down to his frequency.
>
> I'm still experiencing a TX delay, which I think is WSJT commanding 
> the K3 to go Split and then waiting for confirmation. This has been 
> discussed before.  Also, I use VOX and we still don't have VOX 
> settings remembered by mode, so there is constant fiddling to get the 
> VOX to activate.
>
> Wes  N7WS
>
>
> On 6/29/2018 9:46 AM, K1RI wrote:
>> I too run split FT8 Data A.  I cannot get the K3 to transmit in the WSJT
>> DXPedition Hound. What am I missing?  My IC-7610 works great and I 
>> would run
>> a comparison.
>>
>>
>> Tnx,  Bob K1RI
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net