[Elecraft] K3 and WSJT-X Split operation.

[Wes Stewart]

I suppose that you're addressing this to me, but since you didn't quote any 
prior message, who knows.

I realize that Elecraft's position is that VOX is a no-no. However, CAT is a 
PITA no-no for me, particularly when Microsoft reassigns comports Willy-Nilly.

There is a reason for using "real" split and that's to get audio IMD products 
out of the passband.  Except for chasing the KH1 operation, I've abandoned FT8 
and haven't been keeping up, but at one time it was agreed that WSJT-X sends a 
split command to the K3 at the beginning of each transmission and waits for a 
response back before actually transmitting.  Hence the delay.  I fail to see how 
anything done in Task Manager will fix this.  It's a non-issue on receive.

N7WS


On 6/29/2018 11:32 AM, Howard Stephenson wrote:
> I use CAT not VOX, for Split Operation I have Fake It selected.
>
> One thing you may try is to set the WSJT-X  programs priory higher in the
> Task Manager
> Check with Google to see how since each Windows OS is different.
> After I set mine higher I stopped having non decode issues on some passes.
>
> Make sure you have the latest WSJT-X   v1.9.1
>
> Howard K6IA