[Elecraft] KAT500 Macro via the Kpod

[Cady, Fred]

Hi Dany,

1.1    Mixing Transceiver and Panadapter Commands
A single macro sequence of Programmer’s Commands can control both the transceiver and its panadapter.  That is, K3S/K3 and P3 commands, or KX3 and PX3 commands, can be in the same macro.
Mixing both K3S/K3 and P3 or KX3 and PX3 commands can only be used in P3/SVGA or PX3 macros.  P3 and PX3 commands cannot be used in K3S/K3 or KX3 macros.

All should remember that the KPOD does NOT store or generate macro commands.  What it does is activate macros that are stored in the K3(s).

Cheers,
Fred

________________________________
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of Dany VE2EBK <ve2ebk at hotmail.com>
Sent: Thursday, June 28, 2018 2:12 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] KAT500 Macro via the Kpod

OK for KAT500 but in terms of sending macros to the P3 via the Kpod ?
Dany VE2EBK

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at ke7x.com