[Elecraft] [K3] factory upgrade to K3(s)

[Terry Schieler]

Exactly Don.  Thanks for that comment.  That's what the boys at Elecraft recommended when K3S was first announced and we had a field day (pun) with remarks about plural, etc when guys tried to match the logo.  You'll notice that Wayne always uses K3S now on this reflector.  I am still trying to figure out what the K3(s), the K3[s] and K3*s guys are trying to say.  

Don't try to replicate the K3S marketing logo as you can't do it with the font here on the reflector.  Please just use K3S. 

73,

Terry, W0FM

-----Original Message-----
From: Don Wilhelm [mailto:donwilh at embarqmail.com] 
Sent: Wednesday, June 27, 2018 3:41 PM
To: Grant Youngman; Mark E. Musick
Cc: Elecraft Reflector
Subject: Re: [Elecraft] [K3] factory upgrade to K3(s)

Grant,

I always use "K3S" and "K3", and add a lower case "s" for plural.
If you look at the logo, yes, the trailing "S" is smaller than the "K3", 
but not small enough to be lower case (1/2 the height of the caps).

73,
Don W3FPR

On 6/27/2018 4:27 PM, Grant Youngman wrote:
How the heck do you differentiate between plurals with this radio :-)