[Elecraft] P3_SVGA Wireless KB Support?

[Dave Cole (NK7Z)]

I have not found a way to pre-load macros either, but alas, it is the 
same, with or without the Genovation.  The Genovation just forces you to 
load a lot of macros at once, so it feels like it is related.  I think, 
no matter how you use the P3, with or without the Genovation, you always 
need to preload macros by hand.

Like yourself, (here comes a request for a new feature Elecraft folks), 
I would LOVE a way to pretest macros using the P3 utility, then select 
which memory that macro should live in, then blast the tested macro into 
the selected memory on the P3.

73s and thanks,
Dave
NK7Z
https://www.nk7z.net

On 06/25/2018 07:45 AM, David Box wrote:
> Still the biggest problem in using the Genovation or P3 macros in 
> general is the clunky keyboard interface that requires hand typing in 
> all the macros directly into the P3.  I may have missed something but 
> have not seen any method where you can create macros, test them, then 
> transfer to the P3.  Also have not seen anything that allows me to save 
> the macros so I can restore when needed.
> 
> Above issues may be due to my on neglect of keeping up, so if someone 
> has a way to solve would love to hear it.
> 
> Dave K5MWR
> 
> 
> 
> On 6/25/2018 8:48 AM, Dave Cole (NK7Z) wrote:
>> As long as the keyboard appears to be a dumb keyboard it should 
>> work... I have a Genovation 64 Key programmable keypad working that 
>> fires macros into the SVGA, at the push of a single button.  See:
>>
>> https://www.nk7z.net/adding-external-keypad-k3/
>>
>> I fire all sorts of prebuilt macros into the P3, from reconfiguring 
>> the rig for various modes, to setting up complex split operations for 
>> DX, to sending my call in CW.
>>
>> I program the Genovation once, (and never touch it again programming 
>> wise), then just add my macros to the P3 after that. Once a macro is 
>> added, that macro is available at a single button press from then on.
>>
>> Works great in a pileup.  I press the "Split Plus" button on the 
>> Genovation and the P3 moves the tuned DX signal to the hard left side 
>> of the P3 display, sets the span of the P3 to 5 KHz., (showing me the 
>> 5 KHz. above the DX signal), turns on VFO B for control of my my 
>> transmit on the K3, narrows the K3 filter to 100 Hz., (centered on the 
>> DX signal), centers the IF passband on my DX signal, and then shows 
>> the transmit cursor on the P3.
>>
>> This lets me find a hole in the pileup, use the VFO B knob on the K3 
>> to move my transmit to that hole in the pileup, and when I hit the ID 
>> button it fires off my ID as fast, and as often as I press the button 
>> for ID.  The entire operation takes about 2 seconds to set up, and 
>> start calling...
>>
>> 73s and thanks,
>> Dave
>> NK7Z
>> https://www.nk7z.net
>>
>> On 06/25/2018 05:29 AM, N4OI - Ken wrote:
>>>
>>> I have a P3 and will be ordering the P3_SVGA.  I assume this will NOT
>>> support a wireless USB keyboard, but just thought I would confirm before
>>> buying one...  On the topic, any favorite keyboards I should consider 
>>> - or
>>> avoid?   Thanks for your input!
>>>
>>> 73
>>>
>>>
>>>
>>> -- 
>>> Sent from: http://elecraft.365791.n2.nabble.com/
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to dave at nk7z.net
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to dobox at suddenlink.net
>>
>>
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net