[Elecraft] KX3: advise for setting up for WSJT-X

Don Wilhelm donwilh at embarqmail.com
Mon Jun 18 19:51:26 EDT 2018


Ed,

The audio settings for the K3 and K3 are the same, control the audio so 
you have 4 bars solid on the ALC meter with the 5th bar flashing.
Use the computer output controls to establish that level with the KX3 
Mic Gain set to mid-range.

You will want to use the headphone output of the KX3 rather than the IQ 
output.  The IQ output is at too low a level to drive the soundcard 
input for DATA modes.

73,
Don W3FPR


On 6/18/2018 1:20 PM, Edward R Cole wrote:
> Firstly, I am quite comfortable/experienced running JT65 with my K3, so 
> hopefully some of that will transfer to setting up the KX3.
> 
> I have ordered a West Mountain "RIGblaster Plug & Play" with RJ45-to-4 
> ring mic jack optional cable for interfacing my laptop to the KX3.  I 
> still have to download latest vers of WSJT-X.  Hopefully includes a 
> version that has test tones for setting levels.
> 
> I note the DATA button on the KX3 and guess one uses either headphone 
> audio or IQ output from  ACC2.  Not sure which is used by the West 
> Mountain  I/F.
> 
> Any advice from KX3 users of digital modes (particularly on 6m) would be 
> appreciated.  It can be off-list as this as probably been "hashed over" 
> before (I just didn't pay attention).
> 
> We are departing with our 5th wheel trailer for a 2-month+ 9,000-mile 
> trip to lower-48 within a week.
> 
> Major operating plans: CQ-VHF Contest July 21/20 (6m/2m) from Longmont, 
> CO, and
> ARRL 10-GHz Up Contest from Copper Harbor, MI (shore of Lake Superior), 
> August 17/18.
> 
> KX3 with KXPA100 will be used for both plus mobile on the trip , 
> occasionally from RV parks.  I have 80m & 20m Hamsticks, plus 6m Moxon 
> and 2M7 yagi.  APRS tracking when underway.
> 
> 73, Ed - KL7UW
>    http://www.kl7uw.com
> Dubus-NA Business mail:
>    dubususa at gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
> 


More information about the Elecraft mailing list