[Elecraft] ACC1 via Bluetooth HC05 instead of KXSER ?

[Keith Onishi]

My KX3 digi-mode set-up is KX3 -> iMic -> USB Hub -> Macbook and letting VOX control TX mode.
This works fine but is unable to CAT control KX3 from WJST-X.

 73 de JH3SIF, Keith

> 2018/06/19 7:46、Jim Brown <jim at audiosystemsgroup.com>のメール:
> 
> WSJT-X works just fine without a radio control interface -- simply let VOX put you in TX mode and set the radio to the frequency you want.  And, of course, audio I/O to/from computer.
> 
> 73, Jim K9YC
> 
> On 6/18/2018 6:35 AM, John Newgas wrote:
>> I want to use my KX3 with a 12” Macbook  for FT8 and other digi-modes but it has only one USB port.
>> I thought it would be elegant and lightweight use a HC05 serial to bluetooth adaptor  module for the ACC1 interface to avoid cables like the KXUSB or KXSER.
>> 
>> The HC05 is designed for Arduino level 0 volt low and 3.3 volt high.
>> 
>> Has anyone tried one of these  directly with a KX3 ACC1 but without a MAX232 level shifter ?  Before building a small circuit board i thought it worth asking if anyone else has already tried as I am naturally lazy type.
>> 
>> John N
>> 
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jim at audiosystemsgroup.com
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jh3sif at sumaq.jp