[Elecraft] P3TXMON PEP vs K3S/KPA500 PWR?

[Don Wilhelm]

Bret,

Are you using DATA A?  If you are using SSB, then you may have some TX 
EQ cranked in and the power varying with the audio tone.
DATA A automatically sets compression to zero and equalization flat.  Be 
certain to open up the bandwidth to maximum.  DATA A defaults to a 
narrow bandwidth.

73,
Don W3FPR

On 6/17/2018 1:02 PM, MaverickNH wrote:
> Yep - got that set with PC at ~30%, WSJT-X slider at ~60% and MIC (Line Gain)
> at 18 so 4 bars solid and 5th just flickers. The LEDs on the KPA500 remain
> steady, it's just the P3TXMON that seems to vary.