[Elecraft] ATU Manual settings - KPA1500

[K9MA]

I've also noticed that the ATU often doesn't get a very good match, even 
if I try twice as per the manual.  The K3 ATU, by contrast, usually 
finds a much better match for the same load.  (Not talking high load SWR 
here, less than 2:1.)  I haven't compared the component values in the 
two ATU's, but I expect they're similar, so they should be able to 
achieve equally good matches.

Scott K9MA


On 6/16/2018 12:07, Paul Baldock wrote:
> It seems I can get a much better SWR by manually changing the L/C 
> settings. However, I have not figured out how to store those manually 
> entered settings; it always returns to the auto setting (as 
> demonstrated by changing bands and then changing back ).
>
> Anybody know how to do this?
>
> - Paul  KW7Y
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k9ma at sdellington.us


-- 
Scott  K9MA

k9ma at sdellington.us