[Elecraft] KX2 lowers frequency with PTT

[Wayne Burdick]

If switching from “MIC BTN” to “PTT” fixes the problem, then it must be related to the way firmware reads the mic buttons. it could be that we need to tweak the A-to-D thresholds a bit.

Anyone who has this issue could use the “PTT” setting as a work-around, assuming they don’t require the UP/DN functions.

Thanks,
Wayne
N6KR



> On Jun 13, 2018, at 11:22 AM, AE7AP <kingery713 at gmail.com> wrote:
> 
> I used to have this issue (KX3) - I don't recall if it went up or down (I
> think down).  I assumed that I was inadvertently pushing the microphone
> buttons & subsequently switched the "MIC BTN" menu item to "PTT".  I have
> not had the problem occur again.
> 
> 73,
> Rob - AE7AP
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com