[Elecraft] Which MCU Version is the latest?

[Mark E. Musick]

Hi Bob,
Here is the link to the latest firmware. Beta version 5.64.

ftp://ftp.elecraft.com/K3/firmware/beta

It has been out a while. You need this version if you are using the KPA1500
and want the KPA1500 to put the K3/K3S in tune when using the internal ATU.

73,
Mark, WB9CIF

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On
Behalf Of Bob DeHaney
Sent: Saturday, June 9, 2018 9:03 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Which MCU Version is the latest?

The webpage says MCU version 5.62 is the latest.  However, the K3 utility
tells me only MCU version 5.60 is available. What to do?

Vy 73 de Bob DJ0RD/WU5T

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to markmusick at sbcglobal.net