[Elecraft] (no subject)

[Edward R Cole]

For ideas on how to use TX INHIBIT:
http://www.kl7uw.com/TX-INHIBIT.htm

I do exactly as Don suggests; connect KEYOUT to sequencer input and 
last stage of sequencer is "K4" shown in the Inhibit diagram on my webpage.

For ideas on building your computer/radio I/F:
http://www.kl7uw.com/Digital_I-F.htm

73, ED - KL7UW


From: Don Wilhelm <donwilh at embarqmail.com>
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Default K3 transmit delay may be too short for
         slow QRO amplifiers
Message-ID: <53ea136e-5067-df0d-3462-01940840b00f at embarqmail.com>
Content-Type: text/plain; charset=utf-8; format=flowed

With the Elecraft gear (starting with the K3), a sequencer can be
started with the KEYOUT output and RF held off by TX INHibit until the
sequencer completes.
Of course, there are other methods, but to my mind, that is the most
"automatic" method - you operate the transceiver as normal and it "just
happens".

73,
Don W3FPR


73, Ed - KL7UW
   http://www.kl7uw.com
Dubus-NA Business mail:
   dubususa at gmail.com