[Elecraft] K3

[Fred Jensen]

Do any of the other controls give unexpected results?  My very old K3 
[#642] developed that problem.  For example, tapping ATU TUNE might 
switch the AGC from slow to fast instead of initiating an ATU cycle.  I 
found:

1.  Tapping or holding really hard [hard enough that I had to hold the 
radio] would give the expected action.

2.  The effect was more common on controls I rarely used and much less 
common on those I used all the time.

The K3 went to the Elecraft hospital a month ago for some other repairs, 
and they replaced some connector pins with the gold-plated variety.  The 
above described effect disappeared when the radio came home.

73,

Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 7/30/2018 8:15 AM, Ken Roberson via Elecraft wrote:
> Hello all
>
> This must be menu item on the K3 that I have not found.
>
> When I push the tune button the display will change from the RFout meter to ALC
>
>
> On the other K3 when pushing the tune button the display dose not change.
> I prefer that the display not change.
>
>
> Thanks 73 Ken K5DNL
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k6dgw at foothill.net
>