[Elecraft] Survey and summary: Elecraft K3/K3S panadapter solutions

[Roger D Johnson]

It's also fine with a reliable sound card!

73, Roger


On 7/26/2018 6:33 PM, Joe Subich, W4TV wrote:
>
> The issue is that NaP3 does not support Airspy, SDRplay or RTS dongle
> based SDRs.  It's fine if one has LP-Pan with an unreliable sound card
> or Fun Cube Dongle but otherwise it's rather crippled and not readily
> supported.
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 2018-07-26 5:28 PM, ab2tc wrote:
>> Hi,
>>
>> None of you buddies have heard of LP-PAN and NaP3? No RF splitter needed and
>> NaP3 takes care of all the frequency offsets caused by the bandpass shifting
>> on the K3(S). The latest versions of NaP3 even have cluster spots displayed.
>>
>> AB2TC Knut
>>
>>
>> William Liporace - WC2L wrote
>>> Great information!! The Airspy & N1MM+ Spectrum display is pretty cool.
>>> It is radio independent (K3, FTdx500, etc). The cost is $200.  It is
>>> dead easy! My guess the Flex guys used the software included.
>>>
>>> So about 12% of the teams used the Airspy HF+. My guess is that you had
>>> most of them were using N1MM+. I would also like to know who was using
>>> what (radios, software, etc). I have not looked at the web site. If I
>>> remember someone did a list for WRTC 2014.
>>>
>>> I like the Win4K3 suite. For me the missing part is the ability to
>>> include the Airspy HF+. I don't use my P3... It will more than likely go
>>> back into the box.
>>>
>>> Will WC2L
>>> <snip>
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n1rj at roadrunner.com